*mynauticexpo

Catalogs
PSM Instrumentation
DAT-10e-Ultrasonic-8000

DAT-10e-Ultrasonic-8000

1 / 3 PagesView full catalog

DAT-10e-Ultrasonic-8000

Product catalog summary

Key Features

Available in 2, 3, and 4 wire configurations.
Maximum measuring range of 60 meters.
Suitable for both liquids and solids.
Outputs include 4-20mA and two digital switches.
Capable of level and distance measurement.
ATEX options available for hazardous areas.
Easy installation and calibration.

Product Overview

The Ultrasonic 8000 Level Transmitter is a cost-effective solution for measuring levels of liquids and solids. It offers high accuracy and resolution, with the ability to function reliably in acoustically challenging environments such as those with vapors or dust.

Ultrasonic 8000 Series Features

This series can be fully commissioned as a standalone device. It includes an integral display and keypad for accessing scaling parameters. Additionally, it features an RS485 communications port for enhanced functionality. A free Windows-based configuration utility is available for easy setup and diagnostics.

Specifications

Power Supply: 12 - 30V DC
Analogue Output: 4 to 20 mA (750 ohm load at 24Vdc)
Resolution: 1mm at 50, 40, 30 & 20KHz
Accuracy: ±0.25% of maximum range
Operating Temperature: -40 to +60°C
Remote Sensor Temperature: -40°C to +80°C (optionally -40 to +175°C)
Maximum Operating Pressure: 2 bar
Cable Entry: 3 x 16mm cable glands

Typical Applications

The document does not specify typical applications, but the features suggest suitability for industrial environments requiring precise level measurements in challenging conditions.

Catalog excerpts

T: +44 (0)1444 410040 E: [email protected] www.psmmarine.com Ultrasonic 8000 Level Transmitter Key features 2, 3 and 4 wire level transmitters 60m maximum measuring range Suitable for liquids and solids 4 - 20mA outputs + two digital switches Level and distance measurement ATEX options for hazardous areas Simple to install and calibrate © PSM INSTRUMENTATION LTD Data Sheet Ref: DAT 10e 14/09/2011 PSM Instrumentation Ltd, Unit 3 Burrell Road, Haywards Heath, West Sussex, RH16 1TW. UK Subject to change without notice

Open the catalog to page 1

Ultrasonic Level Transmitter A cost effective range of ultrasonic level transmitters for liquid and solid level measurement provides high accuracy and resolution and the ability to automatically compensate for, and operate reliably in, acoustically "noisy" or absorbent atmospheres such as vapour, or dust. The Ultrasonic 8000 Series may be fully commissioned as a stand-alone device, the integral display and keypad provide access to all scaling parameters. Enhancing this functionality, the 8000 Series is equipped with an RS485 communications port. A Windows based configuration utility (available...

Open the catalog to page 2

Power supply: Analogue Output: Operating temperature Remote sensor Temperature: Cable entry: High/Low Solid Feeder Pipe PSM Instrumentation Ltd, Unit 3 Burrell Road, Haywards Heath, West Sussex, RH16 1TW. UK Subject to change without notice

Open the catalog to page 3

DAT-10e-Ultrasonic-8000

DAT-10e-Ultrasonic-8000

Catalog excerpts

All PSM Instrumentation catalogs and brochures