Cargo Overpressure Monitoring and Control System • Designed to comply with • Simple to fit in new ship builds or as • Based on field proven ict 1000 4200 central monitor and alarm panel • Sensors feature positive / negative overload protection Marine Society type approved Approved for hazardous area Part of the TankView product group PSM Instrumentation Ltd, Unit 3 Burrell Road, Haywards Heath, West Sussex, RH16 1TW. UK Subject to change without notice

Cargo Overpressure Monitoring and Control Systems PSM's Cargo Overpressure Monitoring and Control Systems are designed to fully meet SOLAS Regulation 11-2/59.1. The cargo hold pressure transmitters are developed from our widely used and specified hydrostatic level transmitters and are type approved by many marine classification societies. They may also be used in Hazardous Areas when installed with appropriate safety barriers. SOLAS Regulation 11-2/59.1 effective July 1998 requires that a secondary means of allowing full flow of vapour, air or inert gas is provided for cargo pressure measurement...

IWT 4200 Central Monitor, Control central monitoring, control and alarm unit. Constructed using an IP65 wall mounted epoxy coated steel enclosure it is suitable for marine applications and installations. Inputs are 24 channels for 4-20 mA analogue signals from the pressure transmitters. A 16 relay output module (SPCO rated comprehensive local control facilities. Display is an 8 line x 30 character graphic panel. The integral keypad provides full access to the configuration and operating menus. Serial communication to other shipboard sys- tems are also available via an integral RS 485 PSM has...

Typical system components Central Monitor, Remote mounted audable and visual alarms Ship's Voyage Data Recorder RFM-ISR zener barrier hazardous area installation tank or vent pipe Ship's tanks PSM Instrumentation Ltd, Unit 3 Burrell Road, Haywards Heath, West Sussex, RH16 1TW. UK Subject to change without notice