Primer Material Safety datasheet
10Pages

Etching PrimerSafety Data Sheet Section 1 Identification of the material and the supplier A. Propspeed Etching Primer Base B. Propspeed Etching Primer Hardener 782BC Metal Primer Oceanmax International Ltd PO Box 83 232 Edmonton Auckland 0652 New Zealand www.propspeed.com Telephone: 0800 LESS FUEL (0800 5377 3835) Fax: +64 9 813 5246 Emergency Response Telephone: New Zealand Only 0800 243 622 Global Access +64 4 917 9888 NZ National Poisons Centre Telephone: 0800 POISON (0800 764 766) Date of SDS Preparation: 28 September 2015 Product: Product Code: Product Use: Supplier: Section 2 Hazards Identification COMPONENTA: Hazardous Status: Classified as hazardous according to the criteria in the Hazardous Substances (Minimum Degrees of Hazard) Regulations 2001 Surface Coatings and Colourants (Flammable, Corrosive, Toxic[6.7]) - HSR002664 Highly flammable liquid, Cat 2 Skin corrosion/irritation, Cat 2 Serious eye damage/eye irritation, Cat 2A Suspected carcinogen, Cat 2 Toxic to reproduction (unborn child), Cat 2 Specific organ toxicity, (SE) Cat 3, (RE) Cat 2 Toxic to aquatic environment, Cat 2 GHS Signal Word: DANGER All chemicals present in this product are on the TSCS List Product Name: Propspeed Etching Primer Date of SDS: 28/09/15 Prepared by: Technical Compliance Consultants Ltd Tel: +64 9 475 5240 Website: www.techcomp.co.nz

Product Name: Propspeed Etching Primer Date of SDS: 28/09/15 Prepared by: Technical Compliance Consultants Ltd Tel: +64 9 475 5240 Website: www.techcomp.co.nz

Hazardous Status: HSNO Classes: EPA Approval Code: Classified as hazardous according to the criteria in the Hazardous Substances (Minimum Degrees of Hazard) Regulations 2001 3.1B, 6.1E (Oral), 8.2C, 8.3A Surface Coatings and Colourants (Flammable, Corrosive) - HSR002663 Highly flammable liquid, Cat 2 Harmful if swallowed, Cat 5 Severe skin burns/irritation, Cat 3 Serious eye damage/eye irritation, Cat 2A GHS Pictograms: GHS Signal Word: Product Name: Propspeed Etching Primer Date of SDS: 28/09/15 Prepared by: Technical Compliance Consultants Ltd Tel: +64 9 475 5240 Website:...

Section 4 First Aid Measures Burns: Flush with water immediately. While flushing, remove clothes which do not adhere to affected area. Call an ambulance. Continue flushing during transport to hospital. Immediately flush with plenty of water. Remove any contact lenses and open eyes wide apart. Call an ambulance and continue flushing during transportation to hospital. Bring these instructions. Remove contaminated clothing immediately and wash skin with soap and water. Important to remove the substance from the skin immediately. Continue to rinse for at least 15 minutes and seek medical...

Fire Fighting Measures Hazard Type Accidental Release Measures Avoid any exposure. Do not smoke, use open fire or other sources of ignition. For personal protection, see section 8. Follow precautions for safe handling described in this safety data sheet. Absorb spillage with non-combustible, absorbent material. Do not use sawdust or other combustible material. Collect spillage in metal/plastic container with tight-fitting lid, with indication of the contents. Precautions for safe handling: • Keep out of reach of children. • Read label before use. • Read safety data sheet before use. • Do...

Exposure Controls / Personal ProtectionWORKPLACE EXPOSURE STANDARDS (provided for guidance only) Substance COMPONENT A Propan-2-oL 2-MethyLpropan-1-oL Chromium (VI) compounds (as Cr) XyLene, o-, m-, p-or mixed Isomers TaLc, respirabLe dust COMPONENT B Propan-2-oL 2-MethyLpropan-1-oL Workplace Exposure Standard - Time Weighted Average (WES-TWA).The time-weighted average exposure standard designed to protect the worker from the effects of Long-term exposure. Workplace Exposure Standard - Short-Term Exposure Limit (WESSTEL). The 15-minute average exposure standard. AppLies to any 15- minute...

Product Name: Propspeed Etching Primer Date of SDS: 28/09/15 Prepared by: Technical Compliance Consultants Ltd Tel: +64 9 475 5240 Website: www.techcomp.co.nz

Triple rinse or crush containers and dispose of in accordance with Local Regulations. Product Name: Propspeed Etching Primer Date of SDS: 28/09/15 Prepared by: Technical Compliance Consultants Ltd Tel: +64 9 475 5240 Website: www.techcomp.co.nz

UN No Proper Shipping Name Class Packing Group Hazchem Marine Pollutant Propspeed Etching Primer Hardener 3469 PAINT RELATED MATERIAL, FLAMMABLE, CORROSIVE 3,8 II 3WE No Section 15 Regulatory InformationCOMPONENT A: Propspeed Etching Primer BaseGroup Standard: HSR002664 - Surface Coatings and Colourants - Flammable, Corrosive, Toxic (6.7) HSNO Classification: 3.1B, 6.5B, 6.6A, 6.7A, 6.8B, 6.9B, 8.2C, 8.3A, 9.1B HSNO Controls: Level 2: SDS required when any quantity is present in a workplace. Fire Extinguishers: At least 2 x 4.5kg extinguishers required 250L is...

Propspeed Etching Primer HardenerGroup Standard: HSR002663 - Surface Coatings and Colourants - Flammable, Corrosive HSNO Classification: 3.1B, 6.1E (Oral), 8.2C, 8.3A HSNO Controls: Level 2: SDS required when any quantity is present in a workplace. Fire Extinguishers: At least 2 x 4.5kg powder extinguishers required 250L is present in a workplace. Level 3: Emergency Response Plan and Secondary Containment required when >1,000L is present in a workplace. Flammable signage required when >250L is stored. Corrosive signage required when >1,000L is stored. Ecotoxic signage required when...