ProSafe FS SeriesFailSafe Technology with Peace Of Mind Dependability The ProSafe FS Series of FailSafe 30 and 60 Amp Galvanic Isolators will interrupt galvanic current flow with other boats at a marina when installed on a boat which is connected to AC Shore Power. This technology maintains AC safety ground and solves the most common forms of corrosion and premature zinc loss within a boats bonding system. The ProSafe FS Series is UL Certified to meet the parameters of the ABYC A-28 recommendation with a July '08 release date. ProSafe FS installs easily and does not require a dedicated monitor to verify the operational status of the galvanic isolator as required by non FailSafe Certified galvanic isolators. Both the ProSafe 30 and 60 Amp models are built on robust Flat Pack Semiconductor platforms, ensuring that in the event of a failure, the failure is safe by not compromising the ground continuity on-board when connected to AC Shore Power. ABYC A-28 July '08 Compliant and Fail Safe Certified Certified by Underwriters Laboratories (UL). Insures shore power safety ground wire is maintained through the isolator. Flat Pack High Power Semiconductors Robust high power diodes allow the FS Series to meet the new FailSafe criteria for conducting inrush currents of 3,000 and 5,000 amps (FS 30 and FS 60 respectively) for the required duration period. Innovative Design The FS 60 will cool itself in the event it must conduct current insuring cooler operation in this mode. Ignition Protected Meets ISO 8846 and either model can be mounted within an engine compartment. Gold Plated Terminations model part no. shore cord inlet compatibility ratings VAC /AMPS / Hz max temp. size L x W x H weight Professional Mariner, LLC / 200 International Drive, STE 195, Portsmouth NH 03801 / TEL: 603.433.4440 FAX: 603.433.4442 / www.promariner.com Specifications subject to change without notice 110707A