ProMar1 Series

Product catalog summary

Overview: The ProMa r i ne rTM is a fully automatic multi-stage battery charger designed for marine use. It charges, conditions, and maintains batteries with a built-in safe maintenance mode. It is compatible with Flooded (Lead Acid) and GEL batteries but not with AGM or large capacity batteries like 4D or 8D.

Key Features:

Single Preset Charging Profile: Suitable for Flooded and GEL batteries.
Expanded LED Status Center: Provides at-a-glance indicators for AC power, charging, and maintenance status.
Distributed-On-Demand™ Technology: Automatically allocates charging amps to the engine crank battery and trolling motor batteries as needed.
Built-in Quality & Safety: Features include waterproof and shockproof design, dual in-line DC safety fuses, reverse polarity, ignition, and temperature protection.
Pre-Wired for Easy Installation: Comes with a 2-year warranty.

Specifications:

Standard Power Ratings: Includes models with single, dual, and triple bank configurations.
Compliance: Designed to ABYC A-28 standards and certified to Marine UL 1236 SB, CSA C22.2 No. 107.2, and FCC Class A.

Models and Usage:

ProMar1 5 Amp Single Bank: Ideal for one 12V engine crank or trolling motor battery. Model: 31405.
ProMar1 5/3 8 Amp Dual Bank: Suitable for one 12V engine crank and one 12V trolling motor battery. Model: 31408.
ProMar1 5/5 10 Amp Dual Bank: Designed for one 12V engine crank and one 12V trolling motor battery. Model: 31410.
ProMar1 5/5/3 13 Amp Triple Bank: Supports one 12V engine crank and two 12V trolling motor batteries. Model: 31413.

Charging Process:

Charging and Conditioning: Uses available amps to raise battery voltage to 14.1 VDC, safe for Lead Acid or Gel batteries.
Float/Maintenance Mode: Maintains batteries at 13.5 volts, preventing overcharging and suitable for long storage periods.

Catalog excerpts

Recreational Marine Battery Charger 4 Models Single, Dual & Triple Bank ProMar Fully Automatic Charging Inside Fully Automatic Multi-Stage Charging WATERPROOF & SALTWATER Charge, condition & maintain batteries with a built-in safe maintenance mode. Single Preset Charging Profile Use with Flooded (Lead Acid) or GEL batteries. Expanded LED Status Center At-a-glance AC power, charging and ready / maintain LED indicators. Distributed-On-Demand™ Technology Automatically charges & maintains your engine crank battery while distributing all remaining charging amps to trolling motor batterie(s). Built-in Quality & Safety 100% epoxy filled - Completely waterproof & shockproof. Dual in line DC safety fuses (multi-bank models), reverse polarity, ignition and temperature protection. Pre-Wired for Easy Installation 2 Year Warranty Power & Charge Mode Indicators Dual In-line Safety Fuses (Multi-Bank Models Only) Certified to: Marine UL 1236 SB CSA C22.2 No. 107.2 FCC Class A 3097656 Professional Mariner, LLC 200 International Drive, STE 195 Portsmouth, New Hampshire 03801 | ph: 603.433.4440 fax: 603.433.4442 | www.promariner.com Designed and Constructed to: ABYC A-28 specifications subject to change without notice

Open the catalog to page 1

ProMar Fully Automatic Charging Inside ProMar1 Fully Automatic Multi-Stage Charging Overview How Distributed-On-Demand™ Charging Technology Works Charging and Conditioning - Red and Blue LED On ProMar1 will use its available charging amps until battery voltage is raised to 14.1 VDC (safe for Lead Acid or Gel batteries) to complete charging while conditioning batteries. Upon completion the charger will go to into its ready mode. Float / Maintenance - Blue and Green LED Only On ProMar1’s red "Charging" LED will turn off indicating that the charging process is over and the charger is now maintaining...

Open the catalog to page 2

All ProMariner catalogs and brochures

Archived catalogs

ProSport Series On-Board Marine Battery Chargers
2 Pages