*mynauticexpo

PA-06 Data sheet

Product catalog summary

Specifications
The PA-06 actuator operates on 12VDC and 24VDC with a load capacity of 22 to 180 lbs. It features a dynamic full load current of 0.6A at 12VDC and 0.3A at 24VDC, with speeds ranging from 0.47 to 1.38 inches per second. The actuator includes a non-adjustable internal limit switch, a trapezoid screw, and a brushed DC motor. It is constructed from 6063 aluminum, 304 stainless steel, and polyformaldehyde, with a noise level below 60dB and an operational temperature range of -20ºC to 60ºC. The duty cycle is 10%, and it is IP67M rated with optional over-current protection.

Dimensions
For stroke lengths of 2" to 16", the dimensions are calculated as A = Stroke Length + 7.87" and B = Stroke Length x 2 + 7.87". For stroke lengths with Hall Effect Sensor or Over Current Protection, A = Stroke Length + 8.65" and B = Stroke Length x 2 + 8.65". For stroke lengths of 18" to 24", A = Stroke Length + 8.50" and B = Stroke Length x 2 + 8.50".

Connectors & Feedback
The actuator uses a 2-pin standard connector and a 6-pin Hall Effect connector for stroke lengths of 2" to 24". The Hall Effect provides feedback with signals for extending and retracting. Over-current protection cuts off at 5.0A - 5.5A for 12VDC and 2.5A - 3.0A for 24VDC.

Mounting Brackets
Mounting brackets are available in models BRK-16 and BRK-06, with dimensions provided in inches.

Catalog excerpts

PA-06 Scan for more information

Open the catalog to page 1

Specifications Dimensions Speed/Current vs Load Connectors & Feedback Mounting Brackets Have any queries? Our expert engineers are here to help! [email protected]

Open the catalog to page 2

Specifications Load (LBS) Dynamic Static 22 180 Stroke Limit Switch Limit Switch Feedback Screw Type Motor Type Connector Type Wire Length Housing Material Rod Material Gear Material Color (Shaft) Color (Motor End) Noise Duty Cycle Operational Temperature Protection Class Feedback Options Safety Feature Certifications Mounting Brackets Mounting Ends Speed (inch/sec) No Load Full Load 1.38 1.18 0.47 2" to 24" Internal - Non-Adjustable N/A Trapezoid Screw Brushed DC Motor See Page 6 59" (customizable) 6063 Aluminum 304 Stainless Steel Polyformaldehyde Black Black <60dB 10% (2 minutes on, 18 minutes...

Open the catalog to page 3

For All Stroke Lengths with Hall Effect Sensor or Over Current Protection For Stroke Length 18"-24" A = Stroke Length + 8.50" B = Stroke Length x 2 + 8.50"

Open the catalog to page 4

Connectors & Feedback 2-Pin Connector (Standard) Motor 1 Molex Mini Fit Jr 2-Pin Receptacle Molex Mini-Fit Jr. Female Terminal 6-Pin Hall Effect Connector *For Stroke Length 2-24" Hall Sensor Signal 2 Leads when Extending Signal 1 Leads when Retracting Molex Mini Fit Jr 6-Pin Receptacle Molex Mini-Fit Jr. Female Terminal Output Signal Extending Output Signal Retracting Hall Effect 1 Signal Hall Effect 2 Signal Hall Effect 1 Signal Hall Effect 2 Signal Resolution (pulses/inch) Over Current Protection Cut Off Current 12VDC

Open the catalog to page 6

Mounting Brackets (Dimensions in inches) BRK-06

Open the catalog to page 7

PA-06 Data sheet

PA-06 Data sheet

Catalog excerpts

All Progressive Automations catalogs and brochures