*mynauticexpo

PA-04 Data sheet

Product catalog summary

Specifications
The PA-04 linear actuator is available in both 12VDC and 24VDC versions. It features a load capacity ranging from 100 to 1350 lbs, with no-load and full-load current specifications provided for each voltage. The actuator has a stroke length of 1" to 40", is equipped with an internal non-adjustable limit switch, and uses an ACME screw with a brushed DC motor. The housing is made of aluminum alloy, and it operates within a temperature range of -25ºC to 65ºC. It has a noise level of less than 45dB and a duty cycle of 20%.

Dimensions
The actuator's dimensions are calculated based on the stroke length, with specific formulas provided for determining the overall length.

Performance Charts
Graphs illustrate the relationship between speed and load, as well as current and load, for both 12V and 24V configurations. These charts help in understanding the actuator's performance under different load conditions.

Connectors
The standard connector is a 2-pin Molex Mini Fit Jr, with specific part numbers provided for the housing and receptacle.

Mounting Options
Various mounting ends and brackets are available, including H-Type, V-Type, and 45-degree clevis options. Dimensions for mounting brackets are specified.

Internal Components
A detailed list of internal components is provided, including descriptions and quantities for each part, such as the actuator enclosure, power cable, motor unit, and various screws and washers.

Catalog excerpts

PA-04 Scan for more information

Open the catalog to page 1

Specifications Dimensions Speed vs Load/Current vs Load 12V Speed vs Load/Current vs Load 24V Connectors Mounting Ends Mounting Brackets Internal Components Internal Descriptions Have any queries? Our expert engineers are here to help! [email protected]

Open the catalog to page 2

Specifications Load (LBS) Dynamic Static 100 400 600 900 Stroke Limit Switch Limit Switch Feedback Screw Type Motor Type Connector Type Wire Length Housing Material Rod Material Gear Material Color (Shaft) Color (Motor End) Noise Duty Cycle Operational Temperature Protection Class Feedback Options Certifications Mounting Brackets Mounting Ends Full Load Current (A) 12VDC 24VDC 12.0 6.0 Speed (inch/sec) No Load Full Load 2.80 2.16 1" to 40" Internal - Non-Adjustable Available in 24VDC Only ACME Screw Brushed DC Motor See Page 6 40" (customizable) Aluminum Alloy Aluminum Alloy Polyformaldehyde...

Open the catalog to page 3

For Stroke Length A = Stroke Length + 7.87" B = Stroke Length x 2 + 7.87"

Open the catalog to page 4

Speed vs Load 12V Speed vs. Load: PA-04 Linear Actuator 3 Speed (inches/second) Current vs Load 12V Current vs. Load: PA-04 Linear Actuator 16 14 12

Open the catalog to page 5

Speed vs Load 24V Speed vs. Load: PA-04 Linear Actuator 3 Speed (inches/second) Current vs Load 24V Current vs. Load: PA-04 Linear Actuator 7

Open the catalog to page 6

Connectors 2-Pin Connector (Standard) Molex Mini Fit Jr 2-Pin Receptacle Mounting Ends H-Type Clevis (Standard) 45 Degree Type Clevis 1 V-Type Clevis 45 Degree Type Clevis 2

Open the catalog to page 7

Mounting Brackets (Dimensions in inches) BRK-01

Open the catalog to page 8

Internal Components

Open the catalog to page 9

Actuator Enclosure Power Cable With Moun�ng Power Cable Screw Case Moun�ng Bracket Moun�ng Bracket Screw Moun�ng Bracket O-Ring Motor Unit Screw Washer Motor Unit Screw Spring Washer Motor Unit Screw Motor Case Gasket Motor Base Motor Lower Bearing Brush Holder PCB Capacitor Inductor Cable Lock Cable Lock Screw Electric Motor Brush Electric Motor Rotor Bo�om Cap With Moun�ng Hole Electric Motor Enclosure With Stator Top Bearing Holder Top Bearing Motor Top Enclosure Motor Screw Washer Motor Screw Actuator Top Cap Sha� Enclosure Side Screw Sha� Enclosure Side Screw Nut Sha� Enclosure Protector...

Open the catalog to page 10

PA-04 Data sheet

PA-04 Data sheet

Catalog excerpts

All Progressive Automations catalogs and brochures