617 – 7200 MHz, 9.5 dBi; Cellular 4x (4x4 MIMO); Wi-Fi 4x4 MIMO; 2 x GPS/GLONASS CBRS Band High performance, omni-directional marine & coastal antenna Up to 16 x 16 MIMO capability for improved performance Covers contemporary 5G/LTE band from 617 to 7200 MHz Innovative heat sink design for improved temperature regulation UV and saltwater protected for marine and coastal conditions IP65 weather/dust resistant enclosure APPLICATION AREAS Poynting Antennas introduces its all-new marine antenna enclosure range, the Ripple antenna enclosure, which adds to our current WaveHunter series. The Ripple antenna enclosure is designed to fit a variety of router and networking modules, transforming the antenna enclosure into a CPE (Customer Premises Equipment) device – just add your own LTE/5G routers. The Ripple enclosure can accommodate routers up to the size of 300 x 250 x 110 mm³, which can be mounted directly onto the base. The flagship unit will be the RIPL-16 antenna array that consists of 16 cross-polarised, omni-directional antennas arranged in a cross-polarised orientation with 8 x vertically and 8 x horizontally polarised, for improved performance. There is also a RIPL-8 antenna solution, which contains 8 crosspolarised, omni-directional antennas with 4 x vertically and 4 x horizontally polarised. The antennas offer wideband coverage from 617 to 7200 MHz, with a peak gain of 9.5 dBi. Making it ideal for multi-router LTE & 5G bonded and aggregated deployments. The enclosure was designed to withstand adverse weather conditions, making the antenna weatherproof with an IP65 rating. The antenna enclosure was designed specifically for marine & coastal applications. Ultra-wideband coverage from 617 to 7200 MHz High performance antennas with a peak gain of 9.5 dBi Up to 16 x 16 MIMO for improved performance Purpose built antenna for marine and coastal applications Weatherproof and water-resistant enclosure (IP65) Marine applications: Super yachts, commercial vessels, cruise ships, ferries, private yachts, and towing vessels Harsh environments such as harbour buildings, and buoys Enhanced LTE/4G and 5G reception Increase system transmission reliability RIPPLE ©2023 Poynting Antennas (Pty) Ltd. All rights reserved Product Specifications may change without prior notice Revised: February 2023 Regulatory Compliance: RoHS 2011/65/EU Compliant | ISO 9001:2015 Document

The RIPPLE is a circular array of omni-directional antennas that operate in the following frequency bands: | 617 – 960 MHz | 1427 – 1517 MHz | 1710 – 2700 MHz | 3400 – 4200 MHz | 5000 – 7200 MHz | and the following Wi-Fi frequency bands | 2400 – 2500 MHz | and | 5000 – 7200 MHz | Product Order Code (SKU) Wi-Fi- Vertical Polarised (x 2), Wi-Fi- Vertical Polarised (x 2), Wi-Fi- Horizontal Polarised (x 2) Wi-Fi- Horizontal Polarised (x 2) Vertical & Horizontal Vertical & Horizontal Connector Type Coax Cable Type 4 x RG 316 (RA-RPSMA-M to RASMA-M): Wi-Fi 4 x RG 316 (RA-RPSMA-M to RASMA-M): Wi-Fi...

Coax Cable Loss: Frequency bands: Mounting Bracket: Packaged Dimensions: Radome Material: Radome Colour: Brilliant White Pantone P 179-1 C Mounting Type: Surface mount 1 dBi @ 5000 – 7200 MHz VSWR Vertical: VSWR Horizontal: Feed Power Handling: Input Impedance: DC Short: Wind Survival: Temperature Range (Operating): Environmental Conditions: Water ingress protection ratio/standard: Salt Spray: Frequency Range (GPS): Gain (Max): VSWR: Operating Relative Humidity: Noise Figure: Filter Out Band Attenuation: Max. Power: Coax Cable Loss: Frequency: Gain (Max): VSWR: Feed Power Handling: Nominal Input...

9.5 dBi is the peak gain across all bands from 617 – 7200 MHz VSWR is a measure of how efficiently radio-frequency power is transmitted from a power source, through a transmission line, into a load. In an ideal system, 100% of the energy is transmitted which corresponds to a VSWR of 1:1. The RIPL delivers superior performance across all bands with a VSWR of 2.5:1 or better across 90% of the bands. VSWR is a measure of how efficiently radio-frequency power is transmitted from a power source, through a transmission line, into a load. In an ideal system, 100% of the energy is transmitted which corresponds...

8.5 dBi is the peak gain across all bands from 2400 – 7200 MHz VSWR is a measure of how efficiently radio-frequency power is transmitted from a power source, through a transmission line, into a load. In an ideal system, 100% of the energy is transmitted which corresponds to a VSWR of 1:1. The RIPL delivers superior performance across all bands with a VSWR of 2.5:1 or better. + VSWR measured with a 2m low loss cable. ©2023 Poynting Antennas (Pty) Ltd. All rights reserved Product Specifications may change without prior notice Revised: February 2023 Antenna gain measured with polarisation aligned...

©2023 Poynting Antennas (Pty) Ltd. All rights reserved Product Specifications may change without prior notice Revised: February 2023 Regulatory Compliance: RoHS 2011/65/EU Compliant | ISO 9001:2015 Document version: TS-RIPL-V1-01 REV 2.0 www.poynting.tech

©2023 Poynting Antennas (Pty) Ltd. All rights reserved Product Specifications may change without prior notice Revised: February 2023 Regulatory Compliance: RoHS 2011/65/EU Compliant | ISO 9001:2015 Document version: TS-RIPL-V1-01 REV 2.0 www.poynting.tech

©2023 Poynting Antennas (Pty) Ltd. All rights reserved Product Specifications may change without prior notice Revised: February 2023 Regulatory Compliance: RoHS 2011/65/EU Compliant | ISO 9001:2015 Document version: TS-RIPL-V1-01 REV 2.0 www.poynting.tech

©2023 Poynting Antennas (Pty) Ltd. All rights reserved Product Specifications may change without prior notice Revised: February 2023 Regulatory Compliance: RoHS 2011/65/EU Compliant | ISO 9001:2015 Document version: TS-RIPL-V1-01 REV 2.0 www.poynting.tech

Surface Mount ©2023 Poynting Antennas (Pty) Ltd. All rights reserved Product Specifications may change without prior notice Revised: February 2023 Regulatory Compliance: RoHS 2011/65/EU Compliant | ISO 9001:2015 Document version: TS-RIPL-V1-01 REV 2.0 www.poynting.tech