Product data sheet The marinaLightUnit illuminates a rescue ladder at night, enhancing waterfront safety. In dark surroundings the marinaLightUnit’s LEDs illuminate the rungs and side rails of the below ladder, making it recognizable to a person in distress in the water: A clear way to safety. When exposed to sunlight the solar panel charges the built in battery. In dark surroundings the Primary and Secondary LEDs turn on. Two Primary LEDs emit light downwards to illuminate the below safety ladder. One Secondary LED provides land side visibility, marking the safety ladder at night. From a fully charged battery the marinaLightUnit will function for +5 nights if solar panel is covered. For optimum performance, the solar panel must be fully exposed to sunlight. If sunlight is blocked by artifacts, reduced performance must be expected. The marinaLightUnit is waterproof class IP68 and can resist a preassure of up to 20 ton. It is maintenance free and has an expected battery lifetime of 5 years. Mechanical Data The marinaLightUnit is designed for installation above any 3rd party safety ladder and is very easy to install. Installation requires 4 pcs. M4,8 screws of stainless steel (not included). Screw holes measure Ø5,8 mm. General Weight The position of the marinaLightUnit should allow the light from the Primary LEDs to illuminate the below safety ladder, either by shining light down between the pontoon/quay and the ladder Base Plate 5 mm A4 316 Stainless Steel (preferred), or by shining light down on to the front of the safety ladder. Target of both solutions is to illuminate the ladder’s side rails and as many rungs as possible. Ingress Protection and Mechanical Impact Resistance Component numbermost cases the Steel Base will protrude 20 to 35 mm from the front face of the quay. In Material Color S10 316 A4 Stainless Steel Component name mLU Base Tolerances to specified Surface finish to be specified IP Class IP68 Please fine-tune the positionbeof the first marinaLightUnit at night time to ensure the best effect Revision number 1 from 04-03-2021 For optimum postion has been S10_rev1.step IK Class IK10 (undergoing verification) Revision date (d-m-y) the LEDs. When ancomplete geometry and shape details see 3D CAD file defined, the Position Marks on the side of Units Millimeter the Base Plate can be Project as a reference at subsequent installations. used Casing Clear Polycarbonate Sheet size Technical Data Solar Panel Kronprinsensvej 33 2000 Frederiksberg Denmark THE INFORMATION AND DESIGNS CONTAINED IN THIS DRAWING ARE CONFIDENTIAL AND THE PROPRIETARY PROPERTY OF PORT-SAFETY APS. NEITHER THIS DESIGN NOR ANY INFORMATION CONTAINED IN THIS DRAWING MAY BE REPRODUCED OR DISCLOSED TO OTHERS WITHOUT THE EXPRESS WRITTEN CONSENT OF PORT-SAFETY APS. Primary LEDs Cell Type Peak Power upside down Battery Type Nominal Voltage secondary LED for land side visibility Solar Panels Primary LEDs Type Color Temperature Position Marks Color Temperature Base Plate 2021 © miniLightUnit Product Data Sheet ver. 1.03 Port-Safety ApS Kronprinsensvej 33 2000 Frederiksberg Danmark