1. Catalogs
  2. Polymeric Systems
  3. InstaCrete(4020-0908)

InstaCrete(4020-0908)

InstaCrete(4020-0908)

InstaCrete(4020-0908)

Product catalog summary
Product Overview
InstaCrete® is a hand-mixable, fast-setting epoxy putty designed for repairing concrete and masonry. It bonds to various materials including metals, wood, glass, and many plastics. The putty cures to a concrete-like color and texture, making it suitable for both interior and exterior use. It is resistant to water, chemicals, and temperature extremes, and contains no solvents or VOCs.
Applications
InstaCrete can be used for patching floors, curbs, steps, mortar, and brick re-pointing. It is also effective for repairing tiles, statues, lawn ornaments, birdbaths, and cemetery headstones. Additionally, it can anchor bolts, screws, nails, railings, and legs, and seal basement leaks and tie rod holes.
Usage Instructions
1. Roughen and clean the repair area.
2. Cut or twist off the required amount of putty.
3. Mix by kneading with fingers until a uniform color is achieved.
4. Apply to the surface within 2 minutes of mixing, forcing it into cracks or holes.
5. Use damp fingers for easier application and remove excess material before hardening begins.
The putty has a 4- to 7-minute work life and cures functionally within 60 minutes.
Safety Information
Contains epoxy resin and Tri(dimethylaminomethyl)phenol, which may cause allergic reactions. It is harmful if swallowed and an eye and skin irritant. Keep out of reach of children.
Performance Data
- Shelf Life: Minimum 24 months at 75°F (24°C)
- Shore D Hardness: 80 at full cure (24 hrs)
- Compressive Strength: 8,000 psi (55 MPa)
- Shrinkage: <1%
- Non-Volatile Content: 100%
- Dielectric Strength: 300 volts/mil
- Upper Temperature Limits: Continuous 250°F (121°C), Intermittent 300°F (149°C)
- Chemical Resistance: Resistant to hydrocarbons, ketones, alcohols, esters, halocarbons, aqueous salt solutions, and dilute acids and bases.
Packaging and Availability
Available in 3.5" (2 oz) and 7" (4 oz) lengths, packaged in a reusable clear plastic tube with trilingual instructions. Display cartons and blister packs are available for retail.
Contact Information
Polymeric Systems, Inc., 47 Park Avenue, Elverson, PA 19520, USA. Phone: 888-EPOXY FIX (888-376-9934). Email: [email protected]. Website: polymericsystems.com.
See more

Catalog excerpts

InstaCrete(4020-0908)-1

Repair and rebuild anything made of concrete ® InstaCrete CONCRETE REPAIR EPOXY PUTTY STICK Patch... • Floors • Curbs • Steps • Mortar • Brick re-pointing • Chipped concrete • The ultimate solution for small or emergency repairs Repair... • Easy-to-use and mistake-proof • Tile • Statues • Lawn ornaments • Birdbaths • Cemetery headstones • Cracks and seams • Bonds instantly with superior strength • Saves hundreds of dollars in repairs • Belongs in every toolbox Anchor... • Bolts, screws • Nails • Railings • Legs Rebuilds birdbaths, lawn ornaments and statues! Seal... • Basement leaks • Tie rod holes Patches chipped concr ete and mortar! Fills and seals cracks in concrete! Made in U.S.A.

 Open the catalog to page 1
InstaCrete(4020-0908)-2

4 MINUTE WORK LIFE InstaCrete Concrete Repair Epoxy Putty Stick Product Description How To Use InstaCrete is a hand-mixable, fast-setting epoxy putty that quickly repairs concrete and masonry. It also bonds to metals, wood, glass, and many plastics. After mixing, it forms a concrete repair polymer that cures to a concrete-like color and texture. Each handy stick contains pre-measured portions of activator and base throughout — no measuring or mixing tools are necessary. The consistency (like modeling clay) eliminates drips and runs, facilitates adhesion to the substrate, and allows the material...

 Open the catalog to page 2

All Polymeric Systems catalogs and brochures

  1. PSI-613

    3  Pages

  2. PSI-601

    3  Pages

  3. PSI-275

    4  Pages

  4. MIX2FIX® FC

    2  Pages

  5. MIX2FIX®

    2  Pages

  6. Kneadatite®

    2  Pages

  7. FixitFast ®

    2  Pages

  8. AquaMend

    2  Pages

  9. QuikWood

    2  Pages

  10. QuikCopper

    2  Pages

  11. QuikAluminum

    2  Pages

  12. FastSteel

    2  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.