Polyform® SMB100 modular buoyancy Product information Proudly made by The Originator of Modern Plastic Buoys POLYFORM® OF NORWAY The SMB100 modular buoyancy is made from a rotomolded PE outer shell and filled with polyurethane (PUR) foam, with compressive strength for a variety of depth ratings. The continuous high quality chain is terminated at either end of the buoy by use of hot dip galvanized steel terminating discs that are designed to prevent damage to the buoy. The chain is easily attached by shackle to the anchor line. All wear parts are standard components and can easily be replaced. These modular buoys are designed for submerged and surface use and they can be equipped with four yellow, daylight reflective tapes for better visibility. SMB100 - 4 modules Polyform AS Polyform AS is a world leading manufacturer of buoys fenders and floats, and the originator of the modern inflatable plastic buoy. The company is registered in Norway and situated in Ålesund at the northwestern coast of Norway, and benefits from being located in one of the world's most innovative maritime environments. The product range of Polyform AS consists of: •Inflatable buoys and fenders made from soft Vinyl plastics. •Purse Seine Floats, buoys and marina fenders made from BACELL closed cell foam. •Hard-shell buoys and pontoon floats made from PE and filled with foam POLYFORM AS Tverrvegen 37 N-6020 Ålesund Norway Gross measures Article no Max depth rating Gross volume Weight Net buoyancy @ depth rating PU core density Technical Information Breaking load Chain 260 KN Buoy body material description Material Hardness, shore D Tensile strength Ultimate Elongation Recommended min temp. Recommended max temp. Temp. not to be exceeded Specific gravity For all measurements, weights and other technical data specified in this data sheet, please allow for a deviation of not less than +/-5%. The illustration may deviate from the actual product PE10