RM-10 Overhead / Under Dash Stereo Housing The new Poly Planar RM-10 Radio Mount is designed to accommodate today’s larger front panel format Marine radios as well as older DIN style and Post mount. Made from heavy wall ABS plastic, the RM-10 has room for all the accessory cables found on the newest radios. Accepts Poly Planar, Sony, Jensen, Marine AV and even Clarion CMD4! This rugged enclosure is designed for under dash or overhead mounting. The RM-10 comes with mounting screws and self adhesive gasket tape. Mounting instructions For DIN style Radios with Sleeve Mount: Features: • UV stabilized ABS housing REMOVE • Fits DIN and Post-mount Stereos Use a utility knife to remove the Post Mount inserts. Insert the Mounting Sleeve and bend the Securing Tabs to hold the Sleeve in place • Can be installed overhead or Follow the Manufactures directions for mounting and electrical hookups For Post style Mount radios: Mounting instructions Leave the inserts in place. Follow the manufactures directions for mounting and electrical hookup For DIN style Radios with Sleeve Mount: REMOVE Mounting Positions Use a utility knife to remove the Post Mount inserts. Insert the Mounting Sleeve and bend the Securing Tabs to hold the Sleeve in place Follow the Manufactures directions for mounting Shown and electrical hookups For Post style Mount radios: with MRD-60 Stereo (not included) Leave the inserts in place. Follow the manufactures directions for mounting and electrical hookup Mounting Sleeve under dash Mounting Sleeve • Mounting hardware included • Accepts PolyPlanar and most The Poly Planar RH10 can be mounted on any overhead Panel, Shelf top or under dash surface that provides a flat surface of sufficient strength to fasten to . other brands of stereos. 4.323”(110mm) Overall Height Mounting Screws Provided (12) After mounting the radio, use the Self Tapping screws provided to attach the housing. Make sure the position does not obstruct the operators view or control. Mounting Positions The Poly Planar RH10 can be mounted on any overhead Panel, Shelf top or under dash surface that provides a flat surface of sufficient strength to fasten to . After mounting the radio, use the Self Tapping screws provided to attach the housing. Make sure the position does not obstruct the operators view or control. 4.323”(110mm) Overall Height 10.450”(266mm) Overall Depth Mounting Screws Provided (12) Length 10.45” (266mm) Width - 11.86” (302mm) Height - 4.323” (110mm) 11.860” (302mm) Overall Width 10.450”(266mm) Overall Depth POLY-PLANAR • PO Box 409 • Hanover, MD 21076 • (410)761-4000 www.polyplanar.com 11.860” (302mm) Overall Width