DESCRIPTION: The LFL Series is an enclosed and gasketed low-profile fluorescent fixture ideal for applications where space is limited. Typical uses include tunnel lighting, low ceiling applications, paper converting machinery, and commercial and offshore supply ships. LFL SERIES LOW P RO F I L E F LU O R E S C E N T SPECIFICATIONS Housing: 0.090" thick marine-grade low copper content aluminum alloy. Finish: White, thermoset powder coat paint. Diffuser: Ribbed lens, high-impact DR acrylic. End Caps: Non-magnetic, stainless steel end caps and hardware. Gasket: EPDM gasketing provides positve seal against dirt and moisture. Hubs: Hazardous rated supplied with one 1/2" threaded hub, Non-hazardous rated supplied with two 1/2" threaded hubs. Lampholders: Vibration resistant, spring loaded, locking style lampholders are standard. 24" ** 60.96cm 8-1/4" 20.96cm 32 or 40 WATT 8-1/4" Mtg. 20.96cm 1/8" 8-1/4" 20.96cm 2-1/2" 6.35cm 17 or 20 WATT 16" 40.64cm 1/8" Diffuser End Cap • Hazardous Rating • Terminal Block COMPLIANCES Standard Non-Hazardous Model UL1598 - Wet Location UL1598A - Marine Type Electric Fixture Inside drip-proof UL844 - Hazardous Location (HT models only) Class 1, Division 2, Groups A,B,C,D Elevated Ambient (40° C) CSA Certified US Coast Guard Accepted 40" ** 101.60cm 8-1/4" 20.96cm OPTIONS 32 or 40 WATT 5/16" Diam. (4) Holes Base Leg Mounting 8-1/4" Mtg. 20.96cm 1/8" 8-1/4" 20.96cm 2-1/2" 6.35cm 17 or 20 WATT 16" 40.64cm 1/8" Diffuser End Cap Hazardous Model **Note: Mounting Holes are 24" (60.96cm) apart the for standard (non-hazardous) model and 40" (101.60cm) for the Hazardous model. Weight: 7-10 lbs 3.2 - 4.5 kgs N-5610157C 8711 West Port Avenue • Milwaukee, WI 53224 USA • Phone: 414. 973. 3300 • Fax: 414. 973. 3210 www.phoenixproducts.com Durability by Design

ORDERING INFORMATION OPTIONS SERIES LAMP QTY WATT/TYPE LFL 2 17 LFL 2 17* 20 32* 40* example: - VOLTAGE __ 120 120V 24V DC 220V/50H 277V __ ELECTRICAL HT HT TB ELB* Lamps not Included WATT/TYPE VOLTAGE OPTIONS 17* = F17T8 (Med Bi-Pin) 20 = F20T12 (Med Bi-Pin) 32* = F32T8 (Med Bi-Pin) 40* = F40T12 (Med Bi-Pin) (120V, 60HZ Standard) 24V = 24 Volt DC 220/50H = 220 Volt, 50HZ 277V = 277 Volt, 60HZ HT = Hazardous Rated with Terminal Block TB = Terminal Block ELB* = Electronic Ballast standard on all fixtures except 20W * Instant Start Electronic Ballast is Standard N-5610157C 8711 West Port Avenue...