PMEB MEDIUM ELASTOMER MARKER BUOY PMEB design and manufacture a range of IALA compliant marker buoys. There are 10 different configurations available as standard which range form 0.6m – 1.5m diameter. PMEB marker buoys are ideally suited for marinas, lakes, inner harbours and sheltered water locations. Lightweight design enables quick and easy transportation and installation Low maintenance Virtually unsinkable, therefore maximising service reliability Highly impact absorbent materials reduces the likelihood of damage to the buoy Can be fitted with lifting eyes for ease of installation Configured with self-contained LED lights, radar reflector and top mark assembly as required Optional customer graphics for enhanced identification The hull / daymark core construction is closed cell rigid expanded polystyrene or resilient thermolaminated polyethylene foam The hull / daymark skin construction is a polyurethane elastomer skin as standard Can be configured with either a pad eye or through hole for mooring All metal work hot dip galvanised Options available: Self-contained led lights, radar reflect

PERFORMANCE AND PHYSICAL SPECIFICATION Product Refrence Overall Assembly Height (mm) Draft without Mooring (mm) Freeboard without Mooring (mm) Freeboard with Max Mooring (mm) Focal Plane with VLB-2 without Mooring Displacement (kg/cm) Appropriate Weight Gross Buoyancy of Hull (kg) Maximum Mooring Weight (kg) Maximum Chain Size (mm) Recomended Sinker (Cast Iron) (kg) Skin Thickness Single Point Mooring Eye Hole Diameter (mm) Lifting Eyes Radar Reflector (Optional) *All values within this table may vary due to material property and dimensional tolerances and operational conditions. Information...