PMAPI-SC37 w/AIS Self Contained LED Marine Lantern 3 - 6.3 NM at 0.74T OVERVIEW The PMAPI-SC37-AIS is a 3 - 6.3NM weather-protected marine lantern with a high intensity LED light source paired with solar panel, battery array and AIS Aid to Navigation (AtoN) transceiver. KEY FEATURES • Solar power: 3 x 15W solar panels Rugged, weather-resistant construction materials: High impact resistant polycarbonate for ice, ultraviolet exposure, salt air and seawater spray at a wide range of ambient temperatures High intensity, energy efficient fan beam LED array: Maximum visible range up to 6.3NM at 0.74T pending flash character in optimal conditions IR Remote: Powering on & off, set / retrieve configuration parameters such as flash pattern, effective intensity, day/night control, etc. IALA approved colors: Single color LED engine - white, yellow, red or green Integrated bird deterrent: No additional accessories required Longevity - Estimated average service life of 10 years PERFORMANCE FEATURES • Power consumption: variable up to 8.3W Battery: (1) 12V 120Ah Lead Acid Intensity control: Effective lantern intensity set on modified Allard’s Law Flash character control: 256 programmable flash characters and 2 custom flash characters Day/Night transition level settings: Programmable for active at all times or only after sunset. Day / Night level settings (sunset / sunrise transition) can be field programmed Calendar control - Programmable season on/off date Input protection - Lantern power input is reversed polarity protected for field repair Ripple delay - 0.05 to 12.7 seconds & master/slave sync options Storage mode - Automatic storage mode with adjustable automatic wake up Programmable sleep and test modes Dynamic compensation circuitry for the candela low output, based on internal temperature, LED flash duration and LED color, to always keep the same programmed output intensity OPTIONAL FEATURES • GPS Synchronisation: Optional internally mounted hardware will allow the lantern to flash in-sync with other PMAPI and third party lanterns that are GPS synced External I/O port: Allows connection to an external monitoring device or for hardwired synchronisation to other lanterns Charging port: Charge / recharg

STANDARD COMPLIANCE PHYSICAL SPECIFICATIONS Operating temperature range (°C) Operation humidity (%) IP68* Optic Head Only Body material Lens material Solar panels N55015:2013 radiated and conducted emissions*; EN61547:2009 Immunity; FCC 47 CFR Section 15 Class A* Solar body Rotationally moulded Optical Test IALA Recommendation E-200-1 Part 1 Varies by battery used Power supply IEC60945 Section 7 normal and peak voltage, and reverse polarity protection ELECTRICAL SPECIFICATIONS Power Consumption Type 1 AtoN (FATDMA) Less than 0.09Ah/day (with 3 minute position reporting rate) Power ConsumptionType...