PMAPI-SC35
2Pages

Self Contained LED Marine Lantern 3 - 6.3 NM at 0.74T / 3.5 - 7.8 NM at 0.85T OVERVIEW The PMAPI-SC35 is a weather protected solar powered self-contained marine lantern with an LED light source that can be combined with optional GPS or IO port. It can be used as an independent operation for extensive time periods. The high intensity LEDs on a metal core PCB for maximum useful life, with flexible electronic configurations. You can use on/off shore platforms, port and harbor, aquaculture, fixed or floating structures. KEY FEATURES • Configurations: SS (Standard Solar) & LS (Large Solar) Rugged, weather-resistant construction materials: High impact resistant polycarbonate for ice, ultraviolet exposure, salt air and seawater spray at a wide range of ambient temperatures High intensity, energy efficient fan beam LED array: Maximum visible range up to 7.8NM at 0.85T pending flash character in optimal conditions IR Remote: Powering on & off, set / retrieve configuration parameters such as flash pattern, effective intensity, day/night control, etc. IALA approved colors: Single color LED engine - white, yellow, red or green Serviceable: Battery pack is easily disconnected and replaced Integrated bird deterrent: No additional accessories required Longevity - Estimated average service life of 10 years Eternal battery disconnect switch allows for simplified transition from storage to operation PERFORMANCE FEATURES • Intensity control: Effective lantern intensity set on Schmidt-Clausen method Flash character control: 256 programmable flash characters and 2 custom flash characters Day/Night transition level settings: Programmable for active at all times or only after sunset. Day / Night level settings (sunset / sunrise transition) can be field programmed Calendar control - Programmable season on/off date Input protection - Lantern power input from the battery is reversed polarity protected for field repair or light head replacement Ripple delay - 0.05 to 12.7 seconds & master/slave sync options Storage mode - Automatic storage mode with adjustable automatic wake up Programmable sleep and test modes Battery low voltage cutoff Battery voltage and internal temperature LED flashing reports, triggered by commands from the IR remote control (unit will flash 1 1 9 sequences for a 11.9 V battery for example) Battery voltage and internal temperature could be interrogated during day time, even when the lantern is off by the photocell control system. Dynamic compensation circuitry for the candela low output, based on internal temperature, LED flash duration and LED color, to always keep the same programmed output intensity OPTIONAL FEATURES • GPS Synchronisation: Optional internally mounted hardware will allow the lantern to flash in-sync with other PMAPI and third party lanterns that are GPS synced External I/O port: Allows connection to an external monitoring device or for hardwired synchronisation to other lanterns Charging port: Charge / recharg

PHYSICAL SPECIFICATIONS Operating temperature range (°C) Operation humidity (%) Body material Lens material Height (mm/in) Weight (kg/lb) STANDARDS EMI/EMC EN55015:2013 radiated and conducted emissions* EN61547:2009 Immunity FCC 47 CFR Section 15 Class A* Optical Test IALA Recommendation E-200-1 Part 1 Power Supply IEC60945 Section 7 normal and peak voltage, and reverse polarity protection MIL-STD-202G Method 104A Cond. B withstands immersion to 1m depth* Class A, B and C compliant in accordance with USCG 8th District 33 CFR Part 67 for artificial island and structures, and 33 CFR Part 66...