Class 1 Division 2 LED Marine Lantern 5 - 10 NM at 0.74T OVERVIEW The FA‐249 LED Gimbaled Lantern is the technological solution to the problem posed by the movement of large navigation buoys, floating production systems (FPSO) and tension leg platforms (TLP). PMAPI has adapted the FA‐249 lantern to house long lived LEDs mounted in parabolic reflectors, which are mounted on a 2‐axis gimbal within a silicone‐filled base. The FA‐249 LED Gimbaled Lantern maintains its optic in a vertical position for inclinations of +/‐ 9° (18° total). This assures the full light intensity is continually available in the most severe sea conditions. CERTIFICATES • NI/I/2/ABCD/T6 Ta <+49°C/T5 Ta <+64°C • NI/I/2/IIC/T6 Ta < +49°C/ T5 Ta <+64°C • Approved by the U. S. Coast Guard for use on Class A structures in the 8th Coast Guard District at 4 watts. 4 linear arrays of very high flux LEDs individually mounted in a parabolic reflector and driven by specially designed electronics LEDs are mounted on specially designed heat sinks to keep the temperature of the LED below 50°C to assure the design life of 60,000 hours Gimbal hinges are of a special polypropylene material tested to 69 million flex cycles (no metallic parts) The heavy silicone fluid in which the gimbal ounterweight is immersed maintains a viscosity of 100,000 SSU at all operating temperatures; this dampens any violent buoy motion and lengthens the natural period of the mechanism to over nine seconds External electric control module 15 pre‐programmed flash rhythms plus 1 for user programming 360° horizont

PHYSICAL SPECIFICATIONS Height Input Voltage 10‐30 VDC Reverse Polarity Protected Power Consumption 0.7 Amps Per Day at 24V in Gulf of Mexico Available Colours White, Red, Green, Yellow, Blue 250 mm Precision‐Molded, Acrylic Cover Vertical Divergence At 50%: 3.2° Maintained Over a Range of ±9° Tilt Compensated by Gimbaled Mechanism within Lantern Optional Optional UNIFLASH® III Wireless Synchronization Syste or Hardwired Sync Circuit (Optional) Lantern Housing Aluminum Base Operating Temperature ‐20°C to (See Certificate Information Below) PHOTOMETRIC DATA Input Power, W Beam: 360 degrees horizontal....