Ultima SR-40
2Pages

Ultima® SR-40 Dual-Biocide Performance Ablative TECHNICAL BULLETIN 122 8/13 Dual biocides with 40% copper for outstanding control Unique controlled erosion minimizes build up & keeps surface smooth Ablative, multi-season technology provides a continuous supply of fresh biocides Contains PTFE for reduced friction Excellent for fiberglass, wood and steel boats Formerly known as Ultima® SR and Horizons® Pro Ultima® SR-40 utilizes a high cuprous oxide load (40%) combined with the power of Irgarol to offer outstanding dual biocide, multi-season control in all types of fouling. It employs a unique controlled erosion technology to minimize coating build-up and keep underwater surfaces smooth. Its ablative surface wears away with use providing a continuous supply of fresh biocides while eliminating the need for sanding. Ultima® SR-40 contains PTFE for added performance and reduced friction. It can be hauled and re-launched without repainting. Formerly sold as Ultima® SR and Horizons® Pro, this formula has a proven track record as one of America’s premium ablative ® bottom paints. Ultima SR-40 is an excellent choice for power or sailboats with fiberglass, wood or steel hulls. 1092 Blue PHYSICAL DATA VEHICLE TYPE: Synthetic Polymer/Rosin FINISH: Eggshell COLORS: 1092 Blue 1093 Green 1096 Red 1098 Black COMPONENTS: 1 CURING MECHANISM: Solvent Release SOLIDS (theoretical): By weight...79 +/- 2% By volume...56 +/- 2% COVERAGE: 450 sq. ft/gal. VOC: 330 g/l max. (as supplied) ACTIVE INGREDIENTS: Cuprous Oxide...40% N-Cyclopropyl-N1(1,1-dimethylethyl)-6(methylthio)1,3,5-Triazine-2,4-Diamine...2% FLASH POINT: 84°F (SETA) APPLICATION DATA METHOD: Brush, Roller, Airless or Conventional Spray. When applying by roller use a short nap (3/16 inch maximum) roller cover. NUMBER OF COATS: 2 or 3 DRY FILM THICKNESS PER COAT: 2 mils (3.6 wet mils) APPLICATION TEMP: 50° F. Min. / 90°F. Max. DRY TIME* (HOURS): To Recoat To Launch 90°F 3 8 70°F 6 16 50°F 12 24 *The above dry times are minimums. Ultima SR40 may be recoated after the minimum time shown. There is no maximum dry time before launching. THINNER: 120 Brushing Thinner Note: Color differences may occur between actual and color chips shown ASSOCIATED PRODUCTS 120 Brushing Thinner 92 Bio-Blue Hull Surface Prep 95 Fiberglass Dewaxer 6998 Skip-Sand Primer 4700/4701 High Build Epoxy Primer Gray 4100/4101 High Build Epoxy Primer White 6455/044 Metal Primer 6627 Tie-Coat Primer 6980 Rustlok Steel Primer 7050 EZ Fair Epoxy Fairing Compound

Ultima® SR-40 Dual-Biocide Performance Ablative APPLICATION INFORMATION Ultima SR-40 is heavily loaded with cuprous oxide. As a result of this loading there is a tendency for settling to occur, especially if the paint has been on the shelf for several months. It is necessary to thoroughly mix the paint before using. If possible, shake the can of paint on a mechanical paint shaker. Before using, check the sides and bottom of the can to make sure all the pigment has been mixed in. If mixing is going to be done with a wooden paddle or an electric drill mixer, pour off half of the liquid from...