EZ Decks

EZ Decks

EZ Decks

Product catalog summary
Product Overview:
EZ-Decks is a non-skid deck paint designed to provide a durable, weather-resistant finish. It is fade and UV resistant, ensuring long-lasting color retention. The product is easy to apply and is available in three colors: White, Off-White, and Platinum Gray.
Physical Data:
  • Vehicle Type: Oil modified polyurethane
  • Finish: High-gloss
  • Components: 1
  • Curing Mechanism: Air dry/oxidation
  • Solids: 71% by weight, 54% by volume
  • Coverage: 600 sq. ft/gal
  • VOC: 375 g/l max
  • Flash Point: 113°F
Application Data:
  • Method: Brush or roller
  • Number of Coats: Minimum 2
  • Dry Film Thickness: 1.5 mils per coat
  • Application Temperature: 50°F to 90°F
  • Application Humidity: 0% to 90%
  • Dry Time: Varies with temperature (e.g., 1.5 hours to touch at 90°F)
  • Thinner/Cleaner: 120 Brushing Thinner
Application Instructions:
Stir thoroughly before use. Apply with a brush or roller without thinning, unless in hot weather where up to 10% thinner may be added. Avoid application on humid days or when rain is expected. Ensure temperatures remain above 50°F for at least eight hours post-application.
Surface Preparation:
  • Bare Wood: Sand, clean, fill holes, apply clear sealer, and undercoat before applying EZ Decks.
  • Bare Steel: Clean to a bright finish, apply Rustlok Primer, and use Tie-Coat Primer if needed before applying EZ Decks.
  • Bare Aluminum: Clean, etch, apply Metal Primer, and optionally undercoat before applying EZ Decks.
  • Bare Fiberglass: Clean, sand, and apply EZ Decks if in good condition.
  • Painted Surfaces: Clean, sand, and apply EZ Decks if the old paint is in good condition. Remove poor condition paint before proceeding.
Associated Products:
  • D95 Fiberglass Dewaxer
  • 6149 Easypoxy White U/C
  • 6455/044 Metal Primer Pack
  • 6980 Rustlok Primer
  • 6627 Tie Coat Primer
  • 2018 Clear Sealer
  • 120 Brushing Thinner
See more

Catalog excerpts

EZ Decks-1

Non-Skid Deck Paint • Provides a super tough non-skid finish • Extremely durable weather-resistant finish • Fade and UV resistant, colors hold up under tough conditions • EZ decks is simple to use and easy to apply Pettit's EZ-Decks is a super tough polyurethane non-skid performance deck finish. It contains a special grit that produces a slip-resistant finish on all decks and cabin soles. Like other Pettit "EZ" products, EZ-Decks provides the simplest way to achieve optimum results with minimum effort. The durable weather resistant finish resists long term abrasion and abuse. EZ-Decks is loaded with ultraviolet filters to fight against fading while offering superior color retention that will stay vibrant for years without peeling or cracking like other deck finishes. EZ-Decks is available in three popular colors that match up perfectly with Pettit's Easypoxy topside enamel. Note: Color differences may occur between actual and color chips shown PHYSICAL DATA VEHICLE TYPE: Oil modified polyurethane FINISH: High-gloss 3127 White 3128 Off-White 3129 Platinum Gray CURING MECHANISM: Air dry/oxidation SOLIDS (theoretical): APPLICATION DATA METHOD: Brush or roller NUMBER OF COATS: 2 minimum DRY FILM THICKNESS PER COAT: 1.5 mils THINNER: 120 Brushing Thinner CLEANER: 120 Brushing Thinner ASSOCIATED PRODUCTS 6455/044 Metal Primer Pack

 Open the catalog to page 1
EZ Decks-2

APPLICATION INFORMATION Stir thoroughly before use. The non-skid agent in this product will float to the surface in the container and must be stirred thoroughly. May be applied by brush or roller. For brush or roller application, apply without thinning, although in hot weather, 5 to 10% of Pettit 120 Thinner may be added to maintain a wet edge. For best results on large, smooth surfaces roll out using a short nap or foam roller followed immediately by leveling off with the tip of a brush. Do not apply on extremely humid days (90% RH or above) or when rain is threatening. Do not apply in late...

 Open the catalog to page 2

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.