EZ Bilge
2Pages

{{requestButtons}}

Catalog excerpts

EZ Bilge - 1

EZ-Bilge® High-Performance Bilge Paint TECHNICAL BULLETIN Z68 7/10 High-performance coating specially designed for boat bilges Super tough finish is fuel, oil, and abrasion resistant High covering formula is easy to apply Superior protection that withstands tough bilge conditions Pettit’s EZ Bilge is a durable high-performance alkyd finish specially formulated to withstand the abuses associated with boat bilges. The hardwearing finish is resistant to antifreeze, grease, gasoline, diesel fuel, and engine oil. Its tough resilient surface will stand up to years of abrasion and wear. EZ-Bilge utilizes a high-solids formula that is easy to apply by brush, roller or spray and provides excellent coverage. Like other Pettit “EZ” products, EZ-Bilge provides the simplest way to achieve optimum results with minimum effort. 3124 Bilge White 3125 Bilge Gray PHYSICAL DATA APPLICATION DATA Note: Color differences may occur between actual and color chips shown ASSOCIATED PRODUCTS VEHICLE TYPE: Oil modified alkyd METHOD: Brush, roller, or spray. D95 Fiberglass Dewaxer FINISH: High-gloss NUMBER OF COATS: 2 minimum 6149 Easypoxy White U/C COLORS: DRY FILM THICKNESS PER COAT: 1.5 mils 6455/044 Metal Primer Pack (3.0 wet mils) 6980 Rustlok Primer COMPONENTS: 1 APPLICATION TEMP: 50° F. Min. / 90°F. Max. 6627 Tie Coat Primer CURING MECHANISM: Air dry/oxidation APPLICATION HUMIDITY: 0% Min. / 90% Max. 2018 Clear Sealer SOLIDS (theoretical): DRY TIME (HOURS): 6165 Yacht White Undercoater 3124 Bilge White 3125 Bilge Gray By weight...65.0 +/- 2% To Touch To Recoat By volume...51.0 +/- 2% 90°F 1-1/2 8 COVERAGE: 545 sq. ft/gal. 70°F 3 16 VOC: 388 g/l max. 50°F 6 24 FLASH POINT: 110° F THINNER: 120 Brushing Thinner 121 Spraying Thinner CLEANER: 120 Brushing Thinner www.pettitpaint.com - (800) 221-4466 9900 Skidless Compound 120 Brushing Thinner 121 Spraying Thinner

Open the catalog to page 1
EZ Bilge - 2

High-Performance Bilge Paint EZ Bilge is a durable high-performance alkyd finish specially formulated to withstand the abuses associated with boat bilges. The hard-wearing finish may be applied to properly prepared fiberglass, metal, wood, and over existing enamels. EZ Bilge is specifically design to offer exceptionally easy, forgiving application, superb covering properties, good gloss, durability, Coating performance, in general, is proportional to the degree of surface preparation. Follow recommendations carefully, avoiding shortcuts. Inadequate preparation of surfaces will virtually...

Open the catalog to page 2

All Pettit catalogs and brochures

  1. Pontoon Pro

    2 Pages

  2. Neptune5

    2 Pages

  3. Hydrocoat SR

    2 Pages

  4. Horizons®

    2 Pages

  5. SC - 21

    2 Pages

  6. Color Card

    6 Pages

  7. Ultima SR-40

    2 Pages

  8. Hydrocoat

    2 Pages

  9. Sealers

    2 Pages

  10. EZ Decks

    2 Pages

  11. Easypoxy

    2 Pages

Archived catalogs