Easypoxy
2Pages

{{requestButtons}}

Catalog excerpts

Easypoxy - 1

Easypoxy Polyurethane Enamel TECHNICAL BULLETIN 220 02/12 • Exceptionally easy one-part application • Long lasting, durable Polyurethane finish • Fortified with advanced ultraviolet filters • Provides superior gloss retention Easypoxy - Is a modern polyurethane topside and deck enamel improved by the addition of silicone for brilliant shine and easy brushability. It has ultraviolet filters which enhance the already superior gloss retention and durability of polyurethane. The result is a topside finish that’s exceptionally easy to apply, producing a lasting gelcoat-like brilliance with a minimum of effort. For a semi-gloss finish for decks and interiors use 3106 Easypoxy Semi-Gloss White or simply add 9080 Easypoxy Satin Additive to any Easypoxy color for a custom satin look. Although not recommended for constant immersion, Easypoxy can be used on the bottoms of dry-sailed boats that will be in water no more than two days at a time. Allow the last coat of Easypoxy to dry a minimum of 7 days before launching when Easypoxy is used in this manner. PHYSICAL DATA APPLICATION DATA ASSOCIATED PRODUCTS VEHICLE TYPE: Oil modified polyurethane METHOD: Brush, roller, or spray D-95 Fiberglass Dewaxer FINISH: High-gloss NUMBER OF COATS: 2 minimum 92 Bio-Blue Hull Surface Prep COLORS: See Pettit color chart DRY FILM THICKNESS PER COAT: 1.5 mils (3 wet mils) 6149 Easypoxy White U/C 3175 Gloss White 3108 Off White 3229 Bikini Blue 3237 Electric Blue 3348 Jade Green 3415 Sunflower Yellow 3518 Sandtone 3624 Bright Red 3705 Mist Gray 3711 Platinum 3801 Black 3106 Semi-Gloss White 3213 Blue Ice 3232 Teal Blue 3248 Ocean Blue 3350 Kelly Green 3510 Bight Work Brown 3520Grand Banks Beige 3626 Burgundy 3706 Pearl Gray 3720 Dark Gray COMPONENTS: 1 CURING MECHANISM: Air dry/oxidation APPLICATION TEMP: 50° F. Min. / 90°F. Max. 6455/044 Metal Primer Pack APPLICATION HUMIDITY: 0% Min. / 90% Max. 6980 Rustlok Primer DRY TIME (HOURS): 6627 Tie Coat Primer To Touch To Recoat 90°F 70°F 50°F 1-1/2 3 6 8 16 24 THINNER: 120 Brushing Thinner 121 Spraying Thinner CLEANER: 120 Brushing Thinner SOLIDS (theoretical): By weight...62.0 +/- 7% - By volume...49.6 +/- 2% COVERAGE: 600 sq. ft/gal. VOC: 394 g/l for White (other colors will vary slightly) FLASH POINT: 113°F for White (other colors will vary slightly) www.pettitpaint.com - (800) 221-4466 2018 Clear Sealer 9080 Easypoxy Satin Additive 9900 Skidless Compound 7050 EZ-Fair Compound 120 Brushing Thinner 121 Spraying Thinner

Open the catalog to page 1
Easypoxy - 2

Easypoxy Polyurethane Enamel APPLICATION INFORMATION Stir thoroughly before use. Easypoxy may be applied by brush, roller, conventional or airless spray. For brush or roller application apply without thinning although in hot weather 5-10% Pettit 120 Brushing Thinner may be added to maintain a wet edge. For best results on large, smooth surfaces roll out using a short nap roller followed immediately by leveling off with the tip of a brush. For conventional spray application thin 15-20% with Pettit 121 Spraying Thinner. Apply one, thin even coat per day. After an overnight dry, lightly sand...

Open the catalog to page 2

All Pettit catalogs and brochures

  1. Pontoon Pro

    2 Pages

  2. Neptune5

    2 Pages

  3. Hydrocoat SR

    2 Pages

  4. Horizons®

    2 Pages

  5. SC - 21

    2 Pages

  6. Color Card

    6 Pages

  7. Ultima SR-40

    2 Pages

  8. Hydrocoat

    2 Pages

  9. Sealers

    2 Pages

  10. EZ Bilge

    2 Pages

  11. EZ Decks

    2 Pages

Archived catalogs