Rod Insulators
1Pages

Petersen Stainless Rigging Limited Cowen Road, Blaydon on Tyne Tyne & Wear, NE21 5TW t: +44 (0)191 4140156 f: +44 (0) 191 4990041 e:sales@petersen-stainless.co.uk www.petersen-stainless.co.uk insulators - rod rigging Rods Sizes -8 to -30 Benefits It is the only fail safe rigging insulator for wire available on the market today. The insulator diagram detailed below shows a complete assembly consisting of 2 Rod Demi parts. The Rod Demi part can also be used in conjunction with any Wire Rigging Demi. This results in multiple insulator combinations. Please refer to Wire Insulator specification sheet for more information on the Wire Insulator Demi parts or contact us for further information. Utilising the same features that have made the Hi-Mod compression fittings so popular, this insulator has an internal ball-socket in the main body that threads onto the connecting stud. The nut is insulated from the stainless steel body by a Tufnol™ socket, preventing electrical transference to the insulator body or opposite terminal. Should, for any reason, the Tufnol™ be compromised, the nut will bottom out against the stainless housing. While the backstay will loosen, the insulating studs will remain attached to the insulator bodyallowing the rig to be re-tensioned until a repair can be made. L THREAD THREAD Rod Rigging Insulators - Fail Safe Rod Rigging Insulators Rod Size Socket/Cap Thread Thread Length Length L Weight Each Typical M.B.L RIRR-8x7/16 -8 7/16” unf RH 17mm 244mm 560g 67kN RIRR-8x1/2 -8 1/2” unf RH 19mm 250mm 580g 67kN RIRR-10x1/2 -10 1/2” unf RH 19mm 250mm 790g 67kN RIRR-10x9/16 -10 9/16” unf RH 21mm 306mm 800g 72kN RIRR-12x5/8 -12 5/8” unf RH 24mm 310mm 1360g 108kN RIRR-15x5/8 -15 5/8” unf RH 24mm 310mm 1360g 108kN RIRR-15x3/4 -15 3/4” unf RH 29mm 320mm 1490g 180kN RIRR-17x5/8 -17 5/8” unf RH 24mm 310mm 1360g 108kN RIRR-17x3/4 -17 3/4” unf RH 29mm 320mm 1490g 108kN RIRR-22x3/4 -22 3/4” unf RH 29mm 356mm 1490g 157kN RIRR-26x7/8 -26 7/8” unf RH 33mm 378mm 1690g 215kN RIRR-30x7/8 The Hi-Mod insulator meets or exceeds current electrical standards for marine backstay insulators. Available with swageless terminals, swage terminals, eye, fork and toggle ends to suit any application.. Product Code -30 7/8” unf RH 33mm 378mm 1690g 215kN Larger Sizes Manufactured To Order All Hi-MOD products are produced to a high degree of quality control, using modern lean manufacturing processes, resulting in a reliable and consistent product version 1