Wallet efficient solutions for high performance, complete carbon spar packages for mono hulls and catamarans for any yacht type in the 25-65 footer range.

MAST TOP All Pauger carbon yachts spars are fitted with carbon mast tops. These incorporate sheaves tor main halyards and masthead spinnakers it required. They are removable tor maintenance. THE TOP OF THE MAST CRANE is a reintorced tlat carbon plate on which it is easy to drill holes and mount instrument brackets or navigation light. with dead-end access tor 2:1 purchase.

HOUND HALYARD FAIRLEAD The halyard fairlead prevents the spinnaker halyard Prom abrading the mast. OPTIONAL LOCK For the perfect Fit, we install internal or external lock if desired. CAP TANG Stainless steel cap tang can accommodate wire, rod and composite rigging.

FORESTAY FITTING Made from high-strength steel alloy Structurally optimized with Finite Element Analysis CFEM). Can accommodate wire, rod and composite rigging, BLOCK Antal halyard block ensures low friction, while protecting the halyard from wear and tear. LOOP ATTACHEMENT Optional dead-end access for Code 0 halyard.

CARBON SPREADERS AS STANDARDS The airfoil-shaped, tapered carbon spreaders save weight and reduce windage, while the aluminium spreader bar, which has integral stembal seats for diagonals, provides solid support for the spreaders.

Low-windage carbon spreader end fitting with stainless steel tipcup. Note that there is no penalty under IRC For carbon spreaders.

Our booms and vangs can be purchased separately, which can customized to fit any mast type. Pauger carbon booms save 40% of the weight compared to aluminium.

As standard, all Pauger booms are prepared for single line reefing.

BOOM INBOARD END The horizontal pin ends can accomodate blocks for german sheeting.

f OUTBOARD END To withstand rope abrasion the boom outboard end accommodates an aluminium sheavebox.

BOOM VANG FITTING Stainless steel vang fitting is compatible with most types of rigid vangs.

EXIT PLATE Stainless steel exit plate reduces abrasion of halyards and control lines as they exit the mast. Mast heel plugs, made of lightweight aluminium have insulation to prevent corrosion. Optional internal or external hydraulic mast jack systems are available. In smaller masts, a specific hinged mast base allows mast stepping without the need for a crane.

The outer surface can be painted glossy or a matt finish in the color of your choice or with a clear coat to display the carbon fibers, which are all resistant to UV radiation.

Cover photo: NEO 350 Photos: Szalontai Abel. Pedro Martinez/RC 44 class CARBON MAST SOLUTIONS Visit our website www.paugercarbon.com or contact us by email: inFo(f)paugercarbon.com YOUR PARTNER CONTACT: