Racor Engine Air Overview Guide
40Pages

climate control process control sealing & shielding Products and Custom Solutions ENGINEERING YOUR SUCCESS.

ECO-SE (Small Engine Applications) The ECO-SE is designed for small engine applications. It also has two unique features. First, it has a urethane outlet tube which allows the filter to be mounted directly to a metal tube or turbo without an additional rubber connection. Second, the standard unit is a straightthrough air filter, air goes in one end and out the other. Intake adapters are available if you would like to remotely locate the intake. The side inlet version offers additional mounting f lexibility. Durable urethane beaded outlet eliminates additional rubber connections. Easy to...

ECO Series Spin-On Disposable Air Cleaners Beaded outlet. With its revolutionary spin-on design, the completely disposable ECO Series offers faster, safer, more trouble-free service than any other air cleaner today. Built for rugged use, it combines maximum engine protection with fuel-efficient performance and long service life. The ECO Series provides two significant improvements in engine protection. When the filter loads with dirt and replacement is required, collected dust and debris stay safely contained inside the disposable housing, eliminating the chance of contaminating the air...

ECO II Inlet Transition Mounting Adapter ECO II Inlet Transition The ECO II was designed to provide lower replacement filter cost on an under hood truck application due to the 2-piece design. The Inlet Transition adapter is a separate piece that stays on the truck and is purchased separately. The ECO II used without the Inlet Transition has become the standard in the Generator Set market. Air Flow is outside-in with water drain holes around the perimeter. Inlet Transition Installed on ECO-II Dimensions 1/4" Drain Hole ECO II Inlet Transition With Water Separator • No Service • Up to 80%...

ECO-SM (Scheduled Maintenance) The ECO-SM was designed to give additional mounting flexibility to the OEM customer, while offering a greater value to the fleet that changes filters based on a scheduled maintenance program. Due to the various inlet tube locations, the ECO-SM is ideal for retrofit applications. The ECO-SM is for outside-in air flow only and has drain holes around the perimeter. • hoice of three inlet locations C to match new or retrofit applications. • he ECO-SM can be mounted T in any orientation or angle. • conomical scheduled E maintenance design. • Beaded outlet. • ast...

ECO-LL (Long Life) • Beaded outlet. • Long life and disposable. • se when extended U maintenance intervals, or severe service. • ore media surface area than M scheduled maintenance style. • Choice of inlet locations. • Drain holes for water removal. The ECO-LL is similar to the ECO‑SM, but is for applications where the customer wants to get the longest life from their air filter. There are also more sizes available. The ECO-LL is for outside-in air flow only and has drain holes around the perimeter. Specifications Dimensions Part No. Mounting Clamps (2 Required) Dimensions Part No.

ECOLITE • Beaded inlet/outlet. The original ECO Series product, the ECOLITE is still the only air filter in the industry that you can flow air in either direction. This allows a variety of installation options with the same part number replacement filter. • Tapered offset cone design assures uniform air distribution, minimizes air restriction and maximizes filter service life. • The only air filter available with choice of flow directions in a single part number. • Positive barrier, pleated paper media is set in a superior quality adhesive for a permanent seal. The ECOLITE can be mounted in...

ECO-BC (Behind the Cab) Designed for behind the truck cab installations, the ECO‑BC must be mounted vertically with an inside‑out air flow. The ECO-BC air filter can be used for under the hood applications also, and the rubber drain valve in the bottom base allows for water and dirt to easily drain out. Beaded inlet inside-out air flow for vertical applications only Rugged Construction This disposable air cleaner features a slimline vertical design for tight or limited space installations. Bleed Valve Specifications Dimensions Part No. Mounting Clamps (2 Required) Dimensions Part No.

ECO III Parker Racor Engineering Has Raised The Bar on Air Filtration Media Technology The ECO III housing is the tangential orientation of the 7" inlet, which directs air flow evenly around the filter, thus expanding filter life and saving you money. A CCV port enables a closed crankcase ventilation system exhaust line to easily be connected, creating a environmentally sound system. Two molded handles on an extended edge lip, lets your hands grasp firmly to easily remove the filter. Metal clasps provide an air-tight seal without using tools. addition to adding insurance in the unlikely...

ECO III is a Quantum Leap in Air Filtration System Design ECO III is the result of a focused, collaborative effort between Racor engineering and our customers. Onhighway, real-world testing and laboratory certification has resulted in the advanced ECO III product line. Stateof-the-art materials and design features result in installation flexibility, superior performance, ease of service, and unmatched customer satisfaction. 4 Levels of Protection Means ECO III is Sealed for Maximum Engine Protection Introduction to contamination during operation and at service time is a significant...

ECO-Vent DEF Tank Vent Filter The Racor ECO-Vent Filter prevents contamination from entering the DEF tank. It is made using DEF compatible proprietary engineered materials. The mounting bracket is E-coated steel, which resists corrosion from DEF and the environment. Current vehicle applications typically do not have a vent filtration system on the DEF tank, but now you can protect your tank and components with the new Racor ECO-Vent filter. ECO-Vent has successfully completed over a million miles of road testing under severe conditions. In addition, it has passed ISO 5011 air filtration...