Multipass Fuel Polisher P510MAM Fuel Filter Water Separator Fuel Polisher Filtration Solutions The Racor Fuel Polisher removes contamination at the source - the fuel tank. Most filtration solutions block contamination as it moves through the fuel system on the way to the engine. As contamination builds, fuel filters will choke leading to inadequate fuel delivery to the engine, damage to injectors and other engine components, increased emissions, and decreased performance. The Racor fuel polisher removes contamination from the fuel tank allowing the fuel system to run at peak performance. Contact Information Parker Hannifin Corporation Engine Mobile OE Division 3400 Finch Road Modesto, CA 95354 phone 800 344 3286 209 521 7860 fax 209 529 3278 [email protected] www.parker.com/emoe By setting up a new fuel circuit around the fuel tank contaminates such as water, dirt and rust will be removed from the fuel delivery circuit, resulting in increased filter life, better performance, and less downtime to change filters. Fuel polishing can be used in Marine, Ag and Off-highway, Construction, Power-gen, and remote equipment. • Water accumulates in fuel tanks by drawing in moist air during the day and condensing at night. • Bio-fuels and additives can loosen deposits on fuel tanks. • Contamination and debris through distributi

Fuel Polisher Flow Product Features • Bottom loading cartridge design • Aluminum and stainless steel construction • Approved for all bio-fuels to b20 and #2 USLD • Aquabloc® media cartridges • Flow rate to 72 GPH (272 LPH) • Stainless steel water in fuel sensor • UL 1105 fire test certified • 26 PSI MAX pressure output • Electric pump operates in both 12V and 24V applications Fuel Tank Product Specifications Maximum Flow Rate No. of Ports Port Size • Electrical wire harness with control switch included Water Sensor Micron Rating Available Operating Voltage Available Part Numbers P510MAM 2 micron,...