Catalog excerpts
Work 2300 FiFi Work 2300 FiFi is an outstanding tool for demanding fire fighting and rescue operations. The vessel is equipped with two individual fire pumps and 3 remote-controlled fire monitors, and one is even mounted in the top of the remote-controlled crane. Main Dimensions: The ship is protected with a cooling water shield on both sides of the hull and on the wheelhouse. Locating the heat source is easy with the visual and heat-detecting cameras. Loa 23,1 m Lwl 19,7 m Boa 6,4 m Bhull 6,02 m B Chine 5,6 m Deadrise 18,7 degr Depth m vvvax LCG 8 m Displacement light Displacement...
Open the catalog to page 2General Arrangement
Open the catalog to page 4The deck is big in one level and safe to use, with access around the wheelhouse/upper structure.
Open the catalog to page 5Technical data Main engines pump unit / waterjet booster) Water jets Displaying chart, radar Furuno FAR 1508 + XN 20AF Furuno Max Sea Time Zero TZ 3 x Display Furuno TFT 24” Main Fire Pumps 2 x CAT C18 engines Magnetic compass 3 x Webasto Blue Cool C20 Auto pilot system Simrad AP 50 Construction material Generator Output Primary: 415V 20 ekW 50 Hz, Three phase. Speed log system Skipper EML 224 NAVTEX system Battery Output Weather data
Open the catalog to page 6Axis cameras will be connected to Furuno nav system monitors Thermal camera Navigation lights Steering system Simrad Autopilot Searchlight system class A 1 channel watch Talkback system Automatic telephone system ZENITEL VSP Fleet broadband SART system EPIRB system Furuno Tron 40S MKII
Open the catalog to page 7Hull The hull is made of seawater-resistant aluminum (AlMg4,5Mn / EN AW-5083) with material certificate of a recognized classification society (DNV-GL). The dimensioning of the components (outer skin, slats, longitudinal beams, etc.) will be carried out in accordance with the class regulations. The keel, bottom plates, frames, and longitudinal beams will be designed according to requirements. Typical material specification, similar will be defined for the Work 2300 FiFi vessel according to requirements and vessel parameters. Typical frame and bulkhead.
Open the catalog to page 10Painting Painting of the hull is done by specification from suppliers adapted to customer requirements. We normally use International or Jotun colors, depending on regional use typical painting plan with International. Under waterline: Primer Above waterline: Primer
Open the catalog to page 11Interior The room layout and interior are usually an area where customer is participat- Accomodation under front deck, gives lot of space for 4 per- ing most in the design. Wheelhouse is in this boat ½ deck above the deck level, sons. Plenty of storage area can be arranged. giving lot of space in the accommodation below. This is a preliminary layout until project start with design meetings. Here we have a bedroom area on upper deck and lower deck.
Open the catalog to page 12Below some pictures as example, also from the FIFI boat in Finland. This is an accomodation under arrangement from Patrol 1850 boat.
Open the catalog to page 13Deck area On aft deck we have the rescue boat, it’s a well-functioning 6m aluminum boat The Palfinger 8501 TM with radio and winch is useful for other lifting opera- for 8 persons, with the 100 hp 4 stroke Honda engine it’s very useful for daily use. The rescue boat can be lifted by a Palfinger Marine crane assembled on the aft deck.
Open the catalog to page 14High quality and effective water spray system according to specification will be implemented. The system will be optimized to this particular vessel. Above deck are from our FIFI boats in Finland, the Work 2300 FiFi will have more space and wider gangways around. On front deck we have 1 FFS fire monitors 1200/300, and 1 size 600 on the wheelhouse roof.
Open the catalog to page 15Equipment Main Engines and Propulsion In the engine room is 4 Caterpillar C18 747kW / 2300 rpm, connected to ZF 665 The boats main Electrical system is 24VDC with starting batteries for the C18 Gearboxes, Kongsberg 2xS50-3 Waterjets and S45-3 Booster units. engines and consumer batteries separately. The center engines will be connected to FFS fire pump with gear and clutch, so The battery packages are charged from main diesel alternators and 400/230 V either firefighting pump or waterjet will be in use. generators . There is 2 230/400V generators to provide the consumers with power.
Open the catalog to page 16Lights Decklights are arranged with high quality Luminell lights. Decklight Luminell RL C Search light 2x SL2 Led, As Flodlight we intend to use 2 CL25 HMI In the bow we have a Bowlight Luminell BLX D.
Open the catalog to page 17All Oy Kewatec Aluboat AB catalogs and brochures
-
Serecraft WT8 TUG
4 Pages
-
Serecraft SAR 17
9 Pages
-
Work 2200 OSR
7 Pages
-
Work 1800
6 Pages
-
Work 1100 FC
6 Pages
-
Work 1000-3
9 Pages
-
Serecraft W14 AC
6 Pages
-
Serecraft W10
5 Pages
-
Serecraft W10 FC
6 Pages
-
Serecraft W9
5 Pages
-
Serecraft W8 Open
5 Pages
-
Serecraft W8 MC
5 Pages
-
Serecraft W8 Cabin
5 Pages
-
Serecraft P11
5 Pages
-
Rescue 1000 WJ
5 Pages
-
Rescue 1000 OB
5 Pages
-
Patrol 1560
6 Pages
-
Patrol 1250
6 Pages
-
Patrol 1200
6 Pages
-
Patrol 1000 OB
2 Pages
-
Passenger 2400
7 Pages
-
Passenger 2200
6 Pages
-
Passenger 1500 Taxi
7 Pages
-
Passenger 1100
2 Pages
-
Norcraft 1299-470
5 Pages
-
Kewatec Work 1500
6 Pages
-
Kewatec work 1200 OSR
5 Pages
-
Kewatec Work 1100
6 Pages
-
e-Work 2100
7 Pages
-
Ambulance Rescue 1370
5 Pages
-
Norcraft 799-330
5 Pages
-
Pilot 1630
6 Pages
-
Fast Patrol 1850
6 Pages
-
Fast Patrol 1630
5 Pages
-
Serecraft S8
6 Pages
-
Serecraft W8 AC
4 Pages