Fabric Care for ORCA®
2Pages

Fabric Care for ORCA® made by Pennel & Flipo For best results please follow each step for all three products. Step 3 Step 2 NEW MAGIC SHMUFFEX GUMEMP 100 Step 1 NEW MAGIC New Magic: Remo v es su r fa c e dirt . Use: New Magic is recommended for regular light-cleaning. If used more than on a regular basis, we recommend diluting with water. Information Relating to the Maintenance of ORCA® Fabric. From their design and during all stages of manufacturing, ORCA® fabrics are subject to strict quality control to guarantee their best performance on abrasion, ultra-violet, hydrocarbons and aging. However, there are technical limitations identified during the design of our products based on the requirements of environmental protection. The quality of materials used to manufacture our ORCA® fabrics allows us to guarantee performance for 5 years. Prolonging the life and appearance of your ORCA® fabrics is accomplished only through regular maintenance. Regular maintenance will prolong the life and appearance of your ORCA® fabric: • After each use, clean the fabric of your boat with mild soap and water. • At least once a month and before long-term storage period, you must clean the ORCA® fabric following the specific instructions with the range of cleaning products selected for ORCA® fabric (ww.orca.eu). Under certain conditions of use or storage (humidity, confined under a non-breathable cover, presence of oily residue, etc.), mold, algae or bacteria may appear (spots). It is imperative that as soon as they are discovered they must be treated with the selected cleaning products for ORCA® fabric (www.orca.eu). These spots are related to external causes and do not alter the quality of the fabric, therefore, they are not covered by our warranty contract. Only regular maintenance will guarantee the appearance and durability of the fabric of your boat. Some boats equipped with our ORCA® fabrics and properly maintained are in perfect condition after 25 years. Pennel & Flipo Europe Spray New Magic on to a wet tube. Clean and scrub with a non-abrasive sponge. Rinse with clean water. Boulevard de l’Eurozone 102 - 7700 Mouscron - Belgique - e-mail : info@orca.eu - Tél. +32 56 39 21 00

Step 2 SHMUFFEX Properties of Shmuffex: Removes spots on the various layers of the fabric. Use: Apply Shmuffex immediately after completing Step 1. Protect elements surrounding the tube. Wear gloves and protective clothing when handling this product (contains chlorine). Check the expiration date of product before use (risk of loss of effectiveness). Spray Shmuffex generously, then using a non-abrasive sponge, spread over the whole surface of the tube. Let it set for 1 hour and make sure it doesn’t dry out. GUMEMP 100 Properties of Gumemp 100: Protects the fabric against salt, atmospheric...