HINGES & POSITIONING TECHNOLOGY Positioning Technology Southco´s wide range of solutions for controlling motion can be used to enhance functionality in almost any application. The range of solutions can be as simple as the integration of constant torque systems into a standard hinge, or as sophisticated as a fully customized system for positioning or deployment. Backed by Southco´s reputation for engineered reliability, most positioning technology solutions have life-long performance with no requirement for maintenance or adjustment. Torque Hinges • Allow for infinitely variable positioning • Smooth operation enhances the user experience • Adjust the display without knobs or tools • Holds securely in every position Adjustable Torque • Allow end user customization Enhanced functionality Our expanding range of position control hinges can be used to hold a panel open or closed or at any desired angle. Our dynamic torque control technology resists movement of the panel by wind or motion of the vessel. Find out more at www.southco.com/positioncontrol Inside the cabin or cockpit, touch-screen monitors and TV screens can be mounted and then repositioned without the need to fasten or fix joints. The arm will resist motion created by the boat and hold the screen in the desired postion. Constant Torque Please contact Southco or visit our website for an exciting new range of position control products • Pre-set at precise torque values • Maximum reliability, with no need for adjustment Dimensions in millimeters (inch) unless otherwise stated

HINGES & POSITIONINGPosition Control Devices TECHNOLOGY C Dimensions in millimeters (inch) unless otherwise stated

HINGES & POSITIONING TECHNOLOGY AV Series Dynamic Mounting Arm · Tilt · Swivel · Swing Product Detail Wire channel in open position • Intuitive grab and move operation enhances the user experience No knobs or tools required to reposition the display Precise control of operating effort ensures ideal “feel” and eliminates “drift” Holds securely, even in applications with dynamic loading 50 (1.96) • Low profile in the stowed position Folds to within 50 mm of the wall • Snap-open channels simplify wire management Easy display installation and replacement • Factory assembled and ready for use Tilt...

AV Series Dynamic Mounting TECHNOLOGY HINGES & POSITIONINGArm · Tilt · Swivel · Swing Specification and Selection Step 1 Determine display weight and distance (d) from mounting surface to center of gravity. • Smooth operation enhances the user experience Display Weight Step 2 Use chart below to select model (101 or 102). • Adjust the display without knobs or tools • Holds securely in every position Material and Finish Aluminum alloy, powder coated Performance Details Cycle performance: 20,000 cycles within ± 20% of static torque specification Max. dynamic working load: Model 101: 66N (15 lbf)...

HINGES & POSITIONING TECHNOLOGY Surface mount Hinges • Mount directly onto flat surfaces • Stainless steel construction • Two seam design provides clean appearance and smooth surface • Hand polished for a bright finish • Available in various shapes and sizes • Cast versions for superior strength • 1800 Opening Flush Hinges • Hinge recessed into the surface for flush top surface • 304 & 316 stainless steel construction • Thin cast or stamped versions • Minimal hinge profile • Concealed pin construction • Available in various shapes and designs Covered Hinges 304 stainless steel construction with...

Free Operating Hinges HINGES & POSITIONING TECHNOLOGY There is an installation style available to suit almost any application. Some of our most common styles are shown below. Surface Mount: Easy installation and 1800 opening angle Flush Mount: Low profile provides clean exterior lines Offset Mount: Easy installation of overlay doors Two Pivot Mount: Low profile with 1800 opening angle Dimensions in millimeters (inch) unless otherwise stated

HINGES & POSITIONING TECHNOLOGY Surface Mount Hinges • Surface mount • Stamped 304 stainless steel • Stamped 304 stainless steel • Surface mount • Stamped 304 stainless steel • Surface mount Dimensions in millimeters (inch) unless otherwise stated

HINGES & POSITIONING TECHNOLOGY Part No: N6-5A-4V8A1-24 • Surface mount • Stamped 304 stainless steel Part No: N6-5A-4V8-24 • Surface mount • Stamped 304 stainless steel Part No: N6-6C-4V13-24 • Surface mount • Stamped 304 stainless steel 127.0 (5.00") Dimensions in millimeters (inch) unless otherwise stated

HINGES & POSITIONING TECHNOLOGY Surface Mount Hinges • Offset mount • Stamped 304 stainless steel • Surface mount Part No: EH-4A-4V4-24 • Cast 316 stainless steel Dimensions in millimeters (inch) unless otherwise stated

HINGES & POSITIONING TECHNOLOGY Part No: EH-4A-8V5-24 51.3 • Surface mount • Cast 316 stainless steel • Cast 316 stainless steel • Surface mount • Cast 316 stainless steel • Surface mount Dimensions in millimeters (inch) unless otherwise stated

HINGES & POSITIONING TECHNOLOGY Surface Mount Hinges • Cast 316 stainless steel 29.22 (1.15") Part No: EH-4A-4V8A1-24 • Cast 316 stainless steel Part No: EH-4A-3V10-24 • Surface mount 26.5 (1.04") • Cast 316 stainless steel Dimensions in millimeters (inch) unless otherwise stated

HINGES & POSITIONING TECHNOLOGY Part No: 96-VA-4A-24-1 • Surface mount • Pair this hinge with opposite handing for non lift-off configuration • Part number comprises “male and female” leaves of 1 hinge • Cast 316 stainless steel • 37mm x 37mm • Lift-off • Part number comprises “male and female” leaves of 1 hinge • Cast 316 stainless steel • Surface mount • Pair this hinge with opposite handing for non lift-off configuration • Cast 316 stainless steel • Surface mount • Part number comprises “male and female” leaves of 1 hinge 3.2t (0.13") • Pair this hinge with opposite handing for non lift-off...