Deck Fills, Tank Vents, Thru Hulls, Drains, Electronic Access
19Pages

DECK FILLS & TANK VENTS Standard Deck Fills Vented Deck Fills • 316 stainless steel construction • Flush profile • Cap retention cable • Color coded graphics • Available in 316 stainless steel or nylon body with stainless steel cap combination • Innovative design requires a single mounting hole • Cap retention cable • No need for external vent D Pop-out Deck Fills • 316 stainless steel construction • Flush profile • No key needed • Color coded graphics • Cap retention cable • Available with security key locking Flush Tank Vents • Low profile tank vent with an attractive design • Removable cap allows for easy tank pressure test • Available with straight or 90 degree angle • Available with stainless steel or nylon mounting hardware • Tank vent accessory available for a quick 90 degree turn Covered Deck Fills • 316 stainless steel construction • Low profile design • Cover conceals mounting hardware • Color coded graphics • Cap retention cable Environmental Deck Fills • 316 stainless steel construction • Flush profile • Lockable version • Provides a seal to minimise vapour emissions • Retained filling cap Deck Fills and Tank Vents accessories • The following table provides an overview of all replacement parts for Deck Fills and Tank Vents offered Part Number Replacement cap for 1.5" locking (pop-out) Replacement cap for 2" locking (pop-out) Replacement cap for 1.5" regular (pop-out) Replacement cap for 2" regular (pop-out) Replacement washer, screw, clip and cable Replacement cap and cable (standard) Replacement standard deck fill key Dimensions in millimeters (inch) unless otherwise stated

DECK FILLS & TANK VENTS Environmental Deck Fills • 316 stainless steel • Features a captive hinge cap with rubber seal for minimal vapour emissions • Order self-adhesive engraved badges separately • 2-1/8” installation hole required for the 2” fill • 1 7/8” installation hole required for the 1 1/2” fill • Locking & non-locking versions available Part No Environmental Deck Fill Badges • Self adhesive stainless steel badges • Suits all environmental deck fills • International symbol and engraved lettering • Part number includes a strip of 10 badges Badge Part Number M7-24-00-01-8 Standard...

DECK FILLS & TANK VENTS POP-OUT DECK FILL • 316 stainless steel • Pop-out center on cap for easy keyless operation • Available with keyed or standard cap • Features a spring loaded stainless steel cap retention cable • Color-coded international symbol with engraved lettering • 1-7/8” installation hole required for the 1-1/2” fill • 2-1/8” installation hole required for the 2” fill For keyed cap option add -L after the part number FULL COVER DECK FILL • All stainless steel construction. Features an easy grip cap with simple adjustment of orientation after final installation • Features a...

DECK FILLS & TANK VENTS 90° FLUSH TANK VENT • 316 stainless steel • 90° angle design • Unique design allows recessed flush mounting in the hull or cabin sides, protecting the vent body • Modern attractive appearance and high airflow capacity • Barb up installation to prevent tank contamination • Deep or shallow cup provides for installation in material thickness up to 33mm (1-5/16”) STRAIGHT FLUSH TANK VENT • 316 stainless steel • Straight angle design • Unique design permits recessed flush mounting in the hull or cabin sides, protecting the vent body • Attractive appearance and high...

DECK FILLS & TANK VENTS NYSTEEL TANK VENT • 316 stainless steel body with nylon cup and nut • Flushed installation • Removable cap and test fitting allow for quick and easy fuel system pressure check • Suitable for 4-28mm material thickness • Same face size for 16mm (6/8”) and 19mm (3/4”) barb fitting 90° STALON THRU HULL TANK VENT • Nylon body with 316 stainless steel cap • 90° angle design • Comes with a stainless steel integral screen Dimensions in millimeters (inch) unless otherwise stated

DECK FILLS & TANK VENTS STALON TANK VENT • 316 stainless steel body with nylon cup and nut • Available in straight or 90° angle design • Various cup sizes and depths allow for installation in different material thickness • Match with the Southco stainless steel thru hull design • Comes with stainless steel integral screen 90° STALON TANK VENT • Nylon body with 316 stainless steel cup • Comes with stainless steel integral screen Dimensions in millimeters (inch) unless otherwise stated

THRU HULLS Standard Stainless Steel Thru Hulls • 316 Stainless steel construction • Available with barb pipes • Promotes a small visual footprint • Consistent appearance across six different hose diameters E Nysteel Thru Hulls • 316 Stainless steel and high nickel content provides non-magnetic properties and superior corrosion resistance • Light weight thru hull technology • Available with a straight or 90 degree angle • Offers a one man installation with a key barb feature • Available with round face Stalon Thru Hulls • 316 Stainless steel face plate and nylon body offers a light weight...

THRU HULLS THRU HULL WITH BARB FITTING • 316 stainless steel • Reduced face size promotes a small visual footprint • Available in 3 body sizes and fits the 6 most popular barb fittings 90° SHORT THRU HULL • 316 stainless steel • Face size is identical to the Southco standard thru hull fitting Dimensions in millimeters (inch) unless otherwise stated

THRU HULLS NYSTEEL THRU HULL • 316 stainless steel with nylon nut • Attractive round face design • Innovative cast thread technology minimizes rust potential • Light-weight design • Two face sizes STALON THRU HULL • Nylon body with 316 stainless steel cap • Light-weight design with a stainless steel appearance Dimensions in millimeters (inch) unless otherwise stated