OH Fairlead thimbles - 13 Pages

Add to MyNauticExpo favorites
OH Fairlead thimbles

Catalog excerpts

OH Fairlead thimbles (round) OH Marine Equipment has made a new product: OH fairlead thimbles (round). The thimbles can be spliced into control lines and are used to deflect sheets and control lines or for lashings. They are designed to replace blocks in applications where the line passing through the centre is not constantly moving and can for example be used for backstay or barber haulers. OH Fairlead thimbles are available in 6 different sizes in black and they are made of high strength aluminium alloy and are HC/hard-anodised. Diameter outside Diameter inside Fairlead Thimble (round), 20 mm Fairlead Thimble (round), 25 mm Fairlead Thimble (round), 31 mm Fairlead Thimble (round), 38 mm Fairlead Thimble (round), 50 mm Fairlead Thimble (round), 60 mm

 Open the catalog to page 1

Mainsheet system for KNARR OH Marine Equipment has made a mainsheet car with track and end stops designed just for the KNARR-boat. The car and track are constructed in such a way that the specification rules for KNARR are observed. The mainsheet car is available with sheaves and end caps in black delrin (plan bearing) or ball bearing sheaves and end caps in aluminium and are made on request. OH Mainsheet system for KNARR. The mainsheet system includes the following: 1 x OH Mainsheet car 1 x 22 mm track (335 mm) 2 x end stops in stainless steel (AISI 316) If you have questions or need...

 Open the catalog to page 2

Wire blocks OH Marine Equipment has added some new blocks to the existing High Performance series: Wire blocks. The blocks have plan bearing sheave in aluminium and are available with sheave size 35, 45, 57, 75, 100, 125 & 150 mm. The wire blocks are supplied in standard polishing or high polished stainless steel on request. Block features: Block side in stainless steel 316 Plan bearing sheave in aluminium Sheave tyoe Wire block with aluminium sheave Wire block with aluminium sheave Plan bearing Plan bearing Wire block with aluminium sheave Plan bearing Wire block with aluminium sheave Wire...

 Open the catalog to page 3

OH Furling lead blocks OH Marine Equipment has made furling lead blocks for 25 mm stanchions. The blocks are available with or without swirvel and are made in stainless steel 316 with black delrin plan bearing or aluminium ball bearing sheave. The stanchion mount base is included. OH Furling lead block (delrin) mounted on a stanchion. Furling lead block, delrin sheave Furling lead block, aluminium sheave Sheave type Delrin plan bearing Aluminium ball bearing Furling lead block with swivel, delrin sheave Delrin plan bearing Furling lead block with swivel, aluminium sheave Aluminium ball...

 Open the catalog to page 4

Our High Performance blocks size 45, 57, 75 and 100 are now also available with plan bearing sheaves instead of the standard aluminium ball bearing sheaves. The design is the same as known from our existing High Performance Series - the only difference is the sheave. Furthermore, we have introduced size 35 - a new size in the High Performance Series. Size 35 is also available with aluminium ball bearing sheaves - please see page 5 in our High Performance catalogue. The blocks are supplied in standard polishing or high polished stainless steel. Block features: Size 35 - Block side in 1 mm...

 Open the catalog to page 5

Our High Performance blocks size 35 and 45 are the latest members in the High Performance Series. As the other sizes they are developed with emphasis on design and strength. The blocks have aluminium ball bearing sheaves and are mounted with rivets. Both sizes are available with plan bearing sheaves. The High Performance blocks size 35 and 45 are supplied in standard polishing or high polished stainless steel. Block features: Size 35 - Block side in 1 mm stainless steel 316 - mounted with rivets Size 45 - Block side in 1.5 mm stainless steel 316 - mounted with rivets Ball bearing sheave in...

 Open the catalog to page 6

Blocks for boom nok OH Marine Equipment has made two new High Performance blocks size 57 (single and double), which will make it easier to pull the mainsheet from the cockpit. If your track and mainsheet traveller are mounted on the roof in front of the sprayhood the single block will make it possible to turn around the mainsheet and you can pull from the end of the boom instead of the roof. Both systems can be maintained by mounting an extra block. The block consists of a single block with adjustable cam cleat and a fitting in the top for mounting in the groove in the boom. The double...

 Open the catalog to page 7

Safety line For security reasons sailing boats should be equipped with two running lengths of flat safety line, securely and tightly attached to the deck on both sides of the vessel. Life lines are attached to the safety line, allowing the crew to move safely from stem to stern. Sail lines are not recommended for this purpose as their rounded profile can be dangerous when stepped on. OH Marine Equipment has made a safety line for laying out over the entire length of the boat - allowing complete and secure freedom of movement. The OH safety line - also known as Jack line - has a fastener in...

 Open the catalog to page 8

Lazy Jack - 4 lines to boom The OH Lazy Jack kit contains: - 2 stand-up blocks 8 single blocks 10 clips 2 cleats 60 m line (5 mm) 28 screws (M5) 1 drill (4.2 mm) 1 tap (M5) 1 Allen key (3 mm) For mounting you only need a knife, a lighter and a drilling/screw machine. OH Lazy Jack kit - article no. 830004 How to mount the OH Lazy Jack: If you have questions or need further information, please do not hesitate to contact us. www.ohmarine.com

 Open the catalog to page 9

Lazy Jack - 3 lines to boom The OH Lazy Jack kit contains: - 2 stand-up blocks 6 single blocks 8 clips 2 cleats 50 m line (5 mm) 24 screws (M5) 1 drill (4.2 mm) 1 tap (M5) 1 Allen key (3 mm) For mounting you only need a knife, a lighter and a drilling/screw machine. OH Lazy Jack kit - article no. 830003 How to mount the OH Lazy Jack: If you have questions or need further information, please do not hesitate to contact us. www.ohmarine.com

 Open the catalog to page 10

Our High Performance lead blocks with sheave size 32 and 45 are now also availble with plan bearing sheaves instead of the standard aluminium ball bearing sheaves. The blocks have rivets in both ends and are bolted together with allen screws for easy disassembling if needed. The design is the same as known from our existing High Performance Series - the only difference is the sheave. The lead blocks are supplied in standard polishing or high polished stainless steel. Block features: Block side in 2 mm stainless steel 316 Fasteners included Plan bearing sheave in black delrin Top/end in...

 Open the catalog to page 11

All OH MARINE EQUIPMENT catalogs and brochures

  1. Catalogue 2014

    46 Pages

  2. catalogue 2013

    46 Pages

  3. Catalogue 2009

    24 Pages