A Teledyne Odom Hydrographic Echo Sounder Datasheet Teledyne Odom Hydrographic Echotrac CV100 Single or Dual Channel Echo Sounder Compact Survey Solution Move into the digital age with echo sounders from Teledyne Odom Hydrographic. If your survey does not require traditional paper records, then forget about piles of hard copy – the CV-100 has eliminated all that in favor of digital imaging on a PC-based data acquisition system. With the same technology as the popular Echotrac CV and Echotrac MKIII, including Ethernet communications, Teledyne Odom’s CV100 single or dual channel sounder is ready to simplify your transition to the convenience of an all-digital system. Photo courtesy of Teledyne Oceanscience. PRODUCT FEATURES • Multiple time varied gain (TVG) curves (10, 20, 30, and 40 log) • DSP digitizer with manual filter control • Help menus • Manual or auto scale changes (phasing) • Flash memory upgradeable • Calibration menu with controls for transducer draft and index plus sound velocity and bar depth controls • Auto Gain and Auto Power Modes for minimal operator input A Teledyne Marine Company

A Teledyne Odom Hydrographic Echo Sounder Datasheet Echotrac CV100 Digital Hydrographic Echo Sounder TECHNICAL SPECIFICATIONS Single Channel Configuration1 High: 100kHz-750kHz (manual tuning in 1-kHz steps) Low: 3.5kHz-50kHz (manual tuning in 1-kHz steps) variable receiver bandwidth Dual Channel Configuration Accuracy (corrected for sound velocity) Output Power Up to 300 watts RMS < 1 watt minimum Ping Rate Up to 20Hz in shallow water (10m) range Depth Range From <30cm to 600m (depending on frequency and transducer selected) Input Power Requirement Desktop or bulkhead mount (fixing hardware included)...