Clear Coat Material Safety datasheet
7Pages

Clear CoatSafety Data Sheet Section 1 Identification of the material and the supplier Propspeed Clear Coat 782D Propeller Coating Oceanmax International Ltd PO Box 83 232 Edmonton Auckland 0652 New Zealand www.propspeed.com Telephone: 0800 LESS FUEL (0800 5377 3835) Fax: +64 9 813 5246 24 Hour Emergency Response Telephone: +64 274 337 928 (24 hours, 365 days) NZ National Poisons Centre Telephone: 0800 POISON (0800 764 766) Date of SDS Preparation: 03 August 2015 Product: Product Code: Product Use: Supplier: Section 2 Hazards Identification Hazardous Status: EPA Approval Code: GHS Classification: Classified as hazardous according to the criteria in the Hazardous Substances (Minimum Degrees of Hazard) Regulations 2001 Surface Coatings and Colourants (Flammable) - HSR002662 Flammable Liquid and Vapour, Cat 3 Harmful if inhaled, Cat 5 Serious eye irritation, Cat 1 Skin irritation, Cat 1 Respiratory irritation, Cat 2 Toxic to reproduction (unborn child), Cat 2 May cause long lasting harmful effects to aquatic life, Cat 4 Harmful to terrestrial vertebrates, Cat 3 GHS Pictograms: GHS Signal Word: WARNING All chemicals present in this product are on the TSCS List Product Name: Propspeed Clear Coat Date of SDS: 03/08/15 Prepared by: Technical Compliance Consultants Ltd Tel: +64 9 475 5240 Website: www.techcomp.co.nz

Prevention Code Response Code Storage Code Product Name: Propspeed Clear Coat Date of SDS: 03/08/15 Prepared by: Technical Compliance Consultants Ltd Tel: +64 9 475 5240 Website: www.techcomp.co.nz

Composition / Information on Hazardous Ingredients If in Eyes Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Get medical attention if needed. If on Skin Wash with soap and water. Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower. Get medical attention if needed. Never give anything by mouth to an unconscious person. Do NOT induce vomiting. Call a physician immediately. Remove to fresh air and keep at rest in a position comfortable for breathing. Get medical attention if needed. Fire...

Precautions for safe handling: • Ventilation is recommended. • Keep out of reach of children. • Read label before use. • Read safety data sheet before use. • Do not handle until all safety precautions have been read and understood. • Keep away from heat, sparks, open flames and hot surfaces. No smoking. • Keep container tightly closed. • Use only non-sparking tools. • Take precautionary measures against static discharge. • Avoid breathing fumes and vapours or sprays. • Wash hands thoroughly after handling. • Use only outdoors or in a well-ventilated area. • Avoid release to the environment....

Hazardous Decomposition Product Name: Propspeed Clear Coat Date of SDS: 03/08/15 Prepared by: Technical Compliance Consultants Ltd Tel: +64 9 475 5240 Website: www.techcomp.co.nz

Triple rinse and dispose of in accordance with Local Regulations. Ensure waste container is labelled “Hazardous Waste - Flammable” Product Name: Propspeed Clear Coat Date of SDS: 03/08/15 Prepared by: Technical Compliance Consultants Ltd Tel: +64 9 475 5240 Website: www.techcomp.co.nz

Transport Information This substance is classified as a dangerous good according to NZS5433: 2007 Proper Shipping Name PAINT Packing Group III Marine Pollutant No Section 15 Regulatory Information Group Standard: HSNO Classification: HSNO Controls: Level 2: HSR002662 - Surface Coatings and Colourants Flammable 3.1C, 6.1E, 6.3A, 6.4A, 6.8B, 6.9B, 9.1D, 9.3C SDS required when any quantity is present in a workplace. Fire Extinguishers: At least 2 x 4.5kg extinguishers required when >500L is stored. Hazardous Atmosphere Zone required for >100L (closed containers), 25L (decanting),...