video corpo

XP8

XP8

XP8

Product catalog summary
Overview
The OceanLED Xtreme Pro Series XP8 is an advanced underwater lighting solution designed for marine environments. It features a robust design with a 316L stainless steel bezel and chemically resistant polymer body, ensuring durability and impact resistance. The XP8 offers a high lumen output, equivalent to a 50W Xenon light, and is suitable for boats up to 50 feet in length.

Specifications
- Light Output: 2300 fixture lumens
- LED Life Expectancy: 40,000+ hours
- Voltage: 12/24V DC
- Current Draw: 12V DC at 1.65A, 24V DC at 0.75A
- Beam Angle: 60°
- Material: Chemically resistant optical polymer
- Weight: 600g (1.32lbs)
- Installation: Requires a 1/2” (12.5mm) hole in the hull

Features
- Built-in driver with ultra-low power draw and reverse polarity protection
- Tritonium™ coating for easy maintenance
- Active Thermal Control (ATC) to prevent overheating
- Available in multiple colors including Ultra White, Midnight Blue, Sea Green, and a color-changing model

Installation Recommendations
- Suitable for boats up to 50 feet (15m)
- Recommended transom/hull spacing: 2-4 feet (0.5-1.2m)
- Installation depth: 4-8 inches (10-20cm)

Additional Information
The XP8 is designed for underwater use on boats and is not intended for dock lighting. It features OceanLED's Smart Light Technology, ensuring high performance and reliability in marine environments. The product is EMC tested and complies with industry standards.

Contact Information
OceanLED Marine LTD, Hinckley, Leicestershire, UK
Tel: +44 (0) 1455 637505
Email: [email protected]

OceanLED USA LLC, Deerfield Beach, Florida, USA
Tel: +1 954.523.2250
Email: [email protected]

For more details, visit www.oceanled.com.
See more

Catalog excerpts

XP8-1

NEW! OceanLED Marine LTD Xtreme Pro Series Specification Sheet Underwater Lighting Excellence Create an impressive lighting ambiance below the water with the NEW Xtreme Pro Series from OceanLED. • Robust body design The new Xtreme Pro Series has a higher lumen output than previous models with a sleek 316L stainless steel bezel design and extremely robust and body which is highly impact resistant. Exceptionally easy to install on the transom or hull. Maintenance is easy due to its Tritonium™ coating (available on all OceanLED lights); just wipe away marine growth. • NEW 316L Stainless Steel bezel • Equal to 50W Xenon • 12/24V DC • 40,000+ Hour Life • Chemically Resistant Polymer • Twin Core Wire Built-in driver, ultra low power draw, no start-up current required, reverse polarity protection. Suitable for all types of hulls. • Factory Sealed Unit The XP8 and XP16 are available in ‘Colours’ color-change models which allow the user to cycle smoothly between red, green, blue and white and choose virtually any color to display. Xtreme Pro Series lights are designed for underwater use on boats. For above water use choose the Xtreme Trailer Series models. Not intended for use as Dock Lighting; please see our Dock Light Series. Quick Specs HOURS LIFE SPAN FIXTURE LUMENS Description XP8 Xtreme Ultra White LEDs XP8 Xtreme Midnight Blue LEDs XP8 Xtreme Sea Green LEDs 316L HIGHLY Stainless IMPACT Tritonium Steel RESISTANT Bezel Color Midnight Blue XP8 Xtreme Colours LEDs Color Change OceanLED SPEC XTREME / XP8 / 102015 / v6.0 Ultra Whit

 Open the catalog to page 1
XP8-2

Mounting Recommendations Boat size Transom / Hull spacing Transom quantity Installation depth (to top of fixture) Technical Light output equivalent to Fixture Lumens* (total light output from a finished fixture) Typical LED life expectancy Minimum-Maximum operating voltage DC Current / Amp draw (DC) (Amperage draw for Colours models vary by color selected, this is the maximum) Approx. light penetration (avg. water quality) Approx. Light penetration (perfect water quality) Driver type Total weight Extension cable length (standard) Hole cut-out for cable entry Chemically resistant optical polymer...

 Open the catalog to page 2
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.