10˚- 50˚ Beam Projection Angle * Ultra White measurement COLOUR PART# Dual White/Blue LESS POWER USED AND SUPERIOR LIGHTING EFFECT IP69k SUPERIOR PROTECTION, TOTAL PEACE OF MIND Less power used to deliver superior light effect due to advanced Optics • New generation innovative, efficient reflector optics. • Focused side beam produces a blade of light under the water that penetrates further. • All available light is directed with minimal loss. IP69k, the highest achievable rating of protection against water ingress. IP69k goes one step further than the industry standard IP68, giving you additional protection and peace of mind. Yacht Hull Side View A 60° beam loses light upwards BENEFITS OF E7 ANGLED OPTICS Create A Uniform Lighting Effect Around Your Yacht • Choice of Angled optics to counter the hull shape. • 10˚, 20˚, 30˚, 40˚ & 50˚. • 0˚ available as compatible E6. Without Angled Optics Key Light with reflector optic Light with no reflector optic A 20° beam is focused giving greater light penetration in the water A 60° beam loses light into deep water Defined 90˚ x 20˚ Beam The defined 90˚ beam, using advanced reflector optics, when viewed from above reduces the dark areas close to the hull. With Angled Optics The new Explore E7 allows the lights to be internally angled up to 50° in 10° increments to counter the hull. This ensures all the light is delivered where required, producing the best possible, uniform lighting effect; a complete halo of light around the yacht. OceanLED Product Guide / Explore Series / E7 / 250222 Specifications are subject to change without notice. Trademarks are the prop

Isolation Kit Isolation Kit (001-500638) must be used if installing the E7 on metal, carbon fibre and wooden hulled yachts. Choose Either Dual Or Colours Explore E7 (Dual) • Light Assembly Choose between Dual Midnight Blue / Ultra White or RGBW Colours DMX LIGHT OPTION 1 Explore E7 (Dual) • Light Assembly OPTION 2 Explore E7 (Colours) • Light Assembly Extension Choose between Dual Midnight Blue / Ultra White or RGBW Colours DMX OPTION 1 OPTION 2 Choose Internal Beam Angling LIGHT ANGLE Explore E7 (Dual) • Light Assembly Explore E7 (Colours) • Light Assembly Kit Extension kit is required for hulls...

EXPLORE E7 LIGHT CARTRIDGE INSTALLED REAR OF LIGHT LED INDICATOR CONTROL INPUT (XFM) LIGHT CARTRIDGE WITHDRAWN

PRODUCT GUIDE/technical MOUNTING RECOMMENDATIONS Explore E7 Light Assembly & Clamping Kit Boat Size Transom / Hull spacing Product Manual Installation depth below waterline PART PHYSICAL Swith / 3rd Party Control Input Kit Control Link Cable (3m) Control Link Cable (5m) Total Diameter of Flange Diameter of Body Overall Length Control Link Cable (10m) Minimum Withdrawal Space Required Control Link Cable (15m) Hole Cut-Out - Standard - With Isolating Kit Control Link Cable (20m) TECHNICAL Fixture Lumens (Total light output from a finished fixture) Beam Angle Angled Optics Options Min-Max Operating...