Catalogs >
OceanLED >
Explore E3 Colours DMX - Product Guide - OceanLED

Explore E3 Colours DMX - Product Guide - OceanLED
4Pages

Catalog excerpts

Explore E3 Colours DMX - Product Guide - OceanLED - 1

Explore E3 Colours DMX EXCHANGEABLE FLUSH MOUNTED UNDERWATER LIGHT Advanced Optics Ultra Reliable Easy Install Built-in Driver Full Colour Dynamic Audio Mode (Compatible) Wave Motion Mode (Compatible) The Explore E3 Colours DMX takes underwater lighting to breathtaking new heights. This ultrareliable exchangeable flush-mounted, full-colour underwater light, is capable of producing up to 3,500 fixture lumens. Constructed using the finest marine-grade aluminium bronze, and certified to IP69K for water ingress protection, the Explore E3 Colours DMX is the perfect choice for sport fishing vessels, leisure craft, and motor yachts. Benefiting from our signature optics, the Explore E3 creates a blade of light that cuts through the water in a way no other underwater lighting brand can match, the Explore E3 Colours DMX leads its class. IDEAL FOR ALL TYPES OF VESSEL UNRIVALLED QUALITY. TESTED TO IP69K. Ideal for installation on all types of boat, the Explore E3 Colours DMX can be used for everything from motor yachts and day boats, to sport fishing and houseboats. Even boats left in the water for extended periods of time can benefit from Explore E3 Colours DMX lights. The state-of-the-art Tritonium coating protects our lights from underwater growth, allowing the owner or captain to simply wipe over the surface of the light, saving hours of scrubbing. The Explore E3 Colours DMX light has been rigorously tested to IP69K, the highest protection standard available for water ingress, to ensure your complete peace of mind. The forged marine-grade aluminum bronze housing and specialist toughed colourless glass, provide an extremely tough outer surface. The addition of twin seals means the Explore E3 Colours DMX is one of the most robust and long-lasting underwater lights available anywhere. EASY INSTALLATION. SURFACE MOUNTED. INTELLIGENT LIGHTING COMMANDS Thanks to its flush-mounted installation, the Explore E3 Colours DMX is the perfect solution for lighting the sides of your vessel and creating a halo effect. With isolation mounting kits available for wood, GRP and metal hulls, the Explore E3 is truly universal. The additional ability to maintain and replace light cartridges without the need to haul the vessel out of the water, via easy rear access, makes the Explore E3 the ideal solution for vessels that rarely come out of the water. The powerful, digitally enhanced internal microcontroller ensures high-speed efficiency and fast transient response. Built-in active thermal control (ATC) means you never have to worry about overheating. The light will automatically manage its own output and throttle-back as needed, to protect the LEDs. IP69K CERTIFICATION To achieve the IP69K rating, a piece of equipment must go through a rigorous water intrusion test. The product is placed on a turntable that rotates five times a minute. It’s sprayed at 80 to 100 bar/1,160 to 1,450 PSI, in phases of 14 to 16 l/min, and at temperatures up to 176°F/80°C. Ocean LED Marine LTD / Tel +44 (0) 1455 637505 / sales@oceanled.com Ocean LED USA LLC / Tel +1 954 523 2250 / sales@oceanledusa.com / www.oceanled.com Specifications are subject to change without notice

Open the catalog to page 1

Explore E3 Colours DMX - Product Guide - OceanLED - 2

BESPOKE UNDERWATER OPTICS The Explore E3 Colours DMX light benefits from our signature underwater optics, specifically designed by our in-house team of expert engineers to supercharge a light’s performance. With advanced light angling technology, our optics focus the light to create a blade effect, that cuts through the water in a way no other underwater light brand can match. The result is a light which uses far less power than its counterparts, whilst creating a superior effect. . Yacht Hull A 60° beam loses light upwards Side View Water A 20° beam is focused giving greater light...

Open the catalog to page 2

Explore E3 Colours DMX - Product Guide - OceanLED - 3

IMPORTANT FEATURES Full RGBW: Universal colour selection and blending functionality when using the OceanBridge or OceanDMX RC Controller. MOUNTING RECOMMENDATIONS: • Transom Quantity: 2-6 lights Install Depth: 10-12” (25-30cm) Below the waterline Active Thermal Control: ATC prevents overheating. The intelligent internal driver reduces throttles back the lights brightness to protect the LEDs from overheating and causing damage. TECHNICAL INFORMATION: Water Protection Rating Fixture Lumens Current/Power Consumption Material (Mounting Tube) Aluminium Bronze Min/Max Operating Voltage Explore E3...

Open the catalog to page 3

Explore E3 Colours DMX - Product Guide - OceanLED - 4

INSTALLATION (QUICK START GUIDE): 1. 2. Test light(s) before fitting. (1) Apply a generous amount of sealant to the rear of the mounting tube assembly’s bezel to ensure a complete unbroken seal around the light. Make sure sealant fills in the recess groove on the reverse of the light bezel. There should be a continuous and unbroken bead of sealant. To ensure the correct light orientation, position the light with the red arrow sticker (3) on the rear lid pointing up, perpendicular to the waterline. When viewing from the front, make sure the OceanLED logo (2) remains horizontal with the...

Open the catalog to page 4