The original Thru-Hull with the smallest hole cut-out for a Pro Series light at only 1”. KEY FEATURES Elliptical Beam COLOUR * Colours Colours utilize the very latest 4-channel RGBW High Definition LEDs. Controlled via DMX-512 through the vessel’s on-board systems, or wirelessly via third party devices such as an iPad, iPhone or Android, Colours allows you to preprogram more than 40 static and dynamic colour scenes to set the mood, enhance an on-board event or strobe to attract fish. The Colours Thru-Hull model with the smallest hole cut-out for a Pro Series light at only 1” makes it the ideal underwater light for transom mount applications. Suitable for all hull types up to and over 65’ (20m) using 2-6 lights with spacing of 3-5’ (1-1.5m). For metal hulls, add the Delrin Isolation Sleeve accessory. Deutsch plug-and-play quick connectors make this light a quick fit. Maintenance is easy; just wipe away marine growth from its scratch resistant Tritonium™ glass lens With approval by ABS, the Pro Series HD is trusted by boat builders and owners worldwide. • 1” Hole in Hull OceanLED SPEC SHEET / Pro Series / Colours TH / 270218 / v8.2 / Specifications are subject to change without notice. Trademarks are the property of OceanLED.

Colours utilize the very latest 4-channel RGBW (Red/Green/Blue/White) High Definition LEDs. Controlled via DMX-512 through the vessel's on-board systems, or wirelessly via third party devices such as an iPad, iPhone or Android. Use with OceanDMX or with a suitable controller. Light Engine with 1.8m / 6’ Connection Cable Driver with 1.8m / 6’ Power Cable and 1.8m / 6’ Connection Cable 60/20° ELLIPTICAL BEAM ANGLE A wide-angled, focused beam lights up a large area of the water. EASY TO CLEAN Thanks to its Tritonium coating, a simple wipe of the lens removes any underwater growth, saving hours of...