The Allure 50XFM is a compact but powerful Xchangeable Flush Mount light for fiberglass, GRP, wooden, aluminium and steel hulls. KEY FEATURES Circular Beam COLOUR Ultra White Midnight Blue Xchangeable Flush Mount (XFM) is designed to be exchanged without hauling should servicing or upgrading ever be needed. The Allure XFM features an exceptionally low profile bezel, only 4mm (0.16”) thick, giving it virtually unlimited hull mounting options for full/partial wraps maintaining the laminar flow of the vessel. The Allure 50XFM Gen2 MK2.2 comes with an improved locking clip that is easier to access and remove when upgrading or maintenance is required. With approval by ABS and RINA, the Allure Series is trusted by boat builders and owners worldwide. Suitable for Fibreglass, GRP and wooden hulls. Also suitable for aluminium/steel hulls using the Delrin Isolation Sleeve accessory. Deutsch plug-and-play quick connectors make this light a quick fit. • Slim design makes it simple to install on small and medium sized boats. • True 60° beam angle with no fading at the edge giving better illumination. • Easy to clean. OceanLED SPEC SHEET / Allure Series / 50XFM Gen2 MK2.2 / 270218 / v8.2 / Specifications are subject to change without notice. Trademarks are the property of OceanLED.

60° BEAM ANGLE A wide-angled, focused beam lights up a large area of the water. LOW PROFILE BEZEL At only 4mm (0.16”) thick, the Alu Bronze bezel gives virtually unlimited hull mounting options. EASY TO CLEAN Thanks to its Tritonium coating, a simple wipe of the lens removes any underwater growth, saving hours of scrubbing each time you use it. Light Engine with 1.8m / 6' Connection Cable Driver with Power Cable 1.8m / 6' Connection Cable Installation Manual ’Fixture Lumens rating is a measurement of total light output from a finished lighting fixture. This measurement can only be obtained from...