The original Thru-Hull with the smallest hole cut-out for a Pro Series light at only 1”. KEY Up To 11,000 60° 20° Elliptical FEATURES Fixture Lumens Top Beam Side Beam Beam COLOUR Ultra White Midnight Blue Sea Green With 11,000 fixture lumens and a 1 inch (25mm) profile head, the 3010TH is the ideal underwater light for transom mount applications. Suitable for all hull types up to and over 65’ (20m) using 2-6 lights with spacing of 3-5’ (1-1.5m). For metal hulls, choose the Delrin Isolation Sleeve accessory. Deutsch plug-and-play quick connectors make this light a quick fit. Maintenance is easy; just wipe away marine growth from its scratch resistant Tritonium™ glass lens. Three super bright LED colour options, or for an even brighter light choose 3010TH HD Gen2. For a light with a lower profile head for hull mount applications, or that can be exchanged without hauling, choose from our XFM models. For a light with colour-change capabilities choose from our Colours models. With approval by ABS, the Thru Hull Pro Series HD is trusted by boat builders and owners worldwide. • 1” Hole in Hull • Aluminium Bronze AB2 • Three LED colour options OceanLED SPEC SHEET / Pro Series / 3010 TH / 270218 / v8.2 / Specifications are subject to change without notice. Trademarks are the property of OceanLED.

60/20° ELLIPTICAL BEAM ANGLE A wide-angled, focused beam lights up a large area of the water. Light Engine with 1.8m / 6’ Connection Cable PLUG AND PLAY Deutsch plug-and-play quick connectors make this light a quick fit. EASY TO CLEAN Thanks to its Tritonium coating, a simple wipe of the lens removes any underwater growth, saving hours of scrubbing each time you use it. THERMAL PROTECTION In the event of overheating, the thermal protection turns off the power to avoid any damage until the unit has cooled. 12/24V DC Driver 1.8m / 6’ Power Cable Installation Manual ’Fixture Lumens rating is a measurement...