The Allure 250XFM is a compact but powerful Xchangeable Flush Mount light for fiberglass, GRP, wooden, aluminium and steel hulls. KEY FEATURES Circular Beam COLOUR Ultra White DC Midnight Blue DC Ultra White AC Midnight Blue AC Xchangeable Flush Mount (XFM) is designed to be exchanged without hauling should servicing or upgrading ever be needed. The Allure XFM features an exceptionally low profile bezel, only 4mm (0.16”) thick giving it virtually unlimited hull mounting options for full/partials wraps, maintaining the laminar flow of the vessel. The Allure 150/250XFM Gen2 MK2.2 series comes with an improved locking ring, similar to the larger 2010/3010 models. This eases access to the light body when upgrading or maintenance is required. With approval by ABS and RINA, the Allure Series is trusted by boat builders and owners worldwide. Suitable for Fibreglass, GRP and wooden hulls. Also suitable for aluminium/steel hulls using the Delrin Isolation Sleeve accessory. Deutsch plug-and-play quick connectors make this light a quick fit. • Low profile Alu Bronze bezel • Maintenance / upgradeable without hauling • Suitable for all hull types and sizes • Easy to clean OceanLED SPEC SHEET / Allure Series / 250XFM Gen2 MK2.2 / 270218 / v8.2 / Specifications are subject to change without notice. Trademarks are the property of OceanLED.

PRIMARY/SECONDARY BEAM A focused, primary 36° beam with a diffused wider 110° spread. LOW PROFILE BEZEL At only 4mm (0.16”) thick, the Alu Bronze bezel gives virtually unlimited hull mounting options. EASY TO CLEAN Thanks to its Tritonium coating, a simple wipe of the lens removes any underwater growth, saving hours of scrubbing each time you use it. Light Engine with 1.8m / 6' Connection Cable Driver with Power Cable 1.8m / 6' Connection Cable Installation Manual ’Fixture Lumens rating is a measurement of total light output from a finished lighting fixture. This measurement can only be obtained...