1. Catalogs
  2. Oceanic Systems
  3. NMEA2000® to Modbus Gateway

NMEA2000® to Modbus Gateway

NMEA2000® to Modbus Gateway

NMEA2000® to Modbus Gateway

Product catalog summary
Overview: The document describes the 3155 NMEA2000® to Modbus Gateway, a device that facilitates communication between NMEA2000® networks and Modbus RS485 interfaces. It is designed for use in large yacht monitoring systems to manage and control various onboard systems.
Specifications: The Gateway supports up to 3 engines, 8 fuel tanks, 8 fresh water tanks, 8 grey water tanks, 8 black water tanks, 8 oil tanks, 3 generators, 3 AC sources, 8 battery banks, 4 battery chargers, and 8 banks of 28 control switches. It operates on a voltage range of 9 to 32 volts, with a power consumption of 50mA. The device is protected against reverse battery and load dump, and it is designed to be DIN rail mounted.
Design Standards: The Gateway complies with NMEA2000® Level B+, IEC60945, and CE & FCC Electromagnetic Compatibility standards. It supports various NMEA2000® Parameter Group Numbers (PGNs) for different devices, such as engines, tanks, generators, and switches.
Environmental Specifications: The device is classified under IEC06954 with an IP40 protection degree. It operates within a temperature range of -25°C to 55°C and can be stored between -40°C to 70°C. It withstands relative humidity of 93%RH at 40°C.
Usage and Functionality: The Gateway allows Modbus systems to interrogate NMEA2000® data and control onboard facilities through switches and relays. It is designed to be simple, powerful, reliable, and easy to use, with a detailed user manual provided for data management.
Manufacturer Information: The product is manufactured by Offshore Systems (UK) Ltd, with contact details provided for further inquiries.
See more

Catalog excerpts

NMEA2000® to Modbus Gateway-1

Provides Gateway from an NMEA2000® network to a Modbus RS485 interface for all the following devices: The 3155 NMEA2000® to Modbus Gateway provides a powerful solution to convert NMEA2000® messages from engines, tank senders, generators, AC monitors, battery banks, battery chargers and control switches to the Modbus RS485 format. Large yacht monitoring systems use the Modbus RS485 standard to communicate with PLCs and sensors on board to control and monitor on board systems such as tank levels, pump, ventilators, lighting, alarms and other equipment. 3 engines 8 Fuel Tanks 8 Fresh Water Tanks 8 Grey Water Tanks 8 Black Water Tanks 8 Oil Tanks 3 Generators 3 AC Sources such as shore power and AC Bus Bars • 8 Battery Banks • 4 Battery Chargers each supporting up to 3 battery banks • 8 banks of 28 control switches Marine equipment manufacturers are increasingly using the NMEA2000® interface to output data from engines, generators, tank senders, battery chargers and other equipment. The 3155 NMEA2000® to Modbus Gateway provides the perfect link from these device interfaces to the long established Modbus based systems. The Gateway is designed to be DIN rail mounted in a suitable location conveniently positioned to connect by a single cable to the NMEA2000® network and a single RS485 cable to the Modbus system. With this Gateway the Modbus system can simply interrogate the NMEA2000® data from the attached devices and even control up to 8 banks of 28 switches/relays to control on board facilities. It is manufactured to the NMEA2000® network standard and draws just 50mA current from that network. It comes with a detailed User Manual that identifies what NMEA2000® data is available, it’s content, the data format and the data range with the Modbus address to read or control that data. The 3155 is simple. powerful, reliable and very easy to use.

 Open the catalog to page 1
NMEA2000® to Modbus Gateway-2

NMEA2000® to Modbus Gateway Part No. 3155 Unit Dimensions Electromagnetic Compatibility NMEA2000® Parameter Group Numbers (PGNs) Source Eng Params, Rapid Update Fluid Level Fuel Tanks Fresh Water Tanks Grey Water Tanks Black Water Tanks Shore Power / AC Busbars Battery Banks Battery Status Battery Chargers Charger Status Switch Banks of 28 switches Switch Bank Status Switch Bank Control Electrical and Mechanical Operating Voltage Power Consumption Load Equivalence Number Reverse Battery Protection Load Dump Protection Environmental IEC06954 Classification Degree of protection Relative Humidity...

 Open the catalog to page 2

Archived catalogs

  1. water senders

    2  Pages

  2. deck filler

    2  Pages

  3. Volumetric

    2  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.