Electronic Marine Solutions BCAM is a device designed to release a sheet, or any rope, remotely, thanks to an electrical signal connected to a pneumatic distributor. It can be fitted to any type of running rigging, used in addition to a winch that can bear the load, or directly for limited loads. It is a simple and compact release solution which can be controlled either by a push button or by a controller such as the UpSideUp. BCAM Electro-pneumatic cleat • Available in 2 sizes : for ropes from 06 to 016mm and ropes from 014 to 024mm • Uses an Harken® Offshore Cam-Mafic® cleat 280. Aluminium Cam-Mafics® are hardcoat-anodized for high load, high wear, and continuous adjustment applications • Outer footprint no larger than the cleat itself • Releases the rope from the cleat even if there is no tension • Requires an air pressure distributor. Consult us for our different solutions. • The electric signal is applied to the pneumatic distributor and not to the BCAM (no electric component in the BCAM itself) Do not use The ODS Developments products for human suspension, unless product is specifically certified and labeled for such use. Mechanical features

Design : Ocean Data System 11/2016 - Non contractual document: all information and illustrations are subject to change without prior notice. Can not be altered or reproduced without Ocean Data System’s written consent. O&AN ATA YST&M3 Ter Rue Roger Salengro 56100 Lorient - France Tel : +33 2 97 87 92 65 [email protected] www.oceandatasystem.com