video corpo

ZCP
36Pages

{{requestButtons}}

Catalog excerpts

ZCP - 1

Novenco Air Handling Units Climaster ZCP June 2005

Open the catalog to page 1
ZCP - 2

Product Facts Air handling units of type ZCP for units are made in accordance with 4 installation sizes with air flow rates positive pressure 1500 Pa in the unit Self-supporting insulated panels mounted around a light frame structure, divided into sections with integrated, easily accessible air handling components (functions) mounted on solid base frames. Corrosion Classification The units are supplied as standard for operation in unheated, low-corrosion environments in accordance with the Temperature range: -35° C to +70° C with special motor. Delivery Form As standard in sections. Other...

Open the catalog to page 2
ZCP - 3

Description and Capacity Diagram 4 Cross-sectional Dimensions and Connections 6 Heating Coils for Water 14 Cooling Coils for Water 16 Cooling Coils for Direct Expansion 18 Electric Heating Coils 18 Twin-coil Heat Exchangers 19 Novax Axial Flow Fans 23

Open the catalog to page 3
ZCP - 4

Description and Capacity Diagram for High Air Flow Rates Louvre damper Heating and cooling coils Centrifugal Fans Axial Flow Fans

Open the catalog to page 4
ZCP - 5

handling units for individual described in further detail on page 8. ZCP is used in large ventilation and air conditioning systems, including installations with high requirements ZCP units are available in 4 sizes with air flow rates up to 30 m3/s and included comprise: - Dampers for shut-off, mixing and - Filters with different degrees of - Heating and cooling coils for water for heating and cooling the air and for twin-coil heat recovery - Cooling coils for direct expansion. - Electric heating coils. - Double inlet centrifugal fans or axial flow fans with fixed blades. - Inspection rooms...

Open the catalog to page 5
ZCP - 6

Cross-sectional Dimensions and Connections Inlet damper SF* and outlet with end panel. * Only for heating and cooling coils, both Outlet, centrifugal fans, Outlet, axial flow fans. Position Designations Main position of the unit, seen from Pos. R: Air flow direction to the right. Pos. L: Air flow direction to the left. Connection Positions: Inlet, mixing damper: Pos. 1,2 and 4.

Open the catalog to page 6
ZCP - 7

Dimensions Tables Outlet - Centrifugal Fans CL Outlet - Axial Flow Fans AC Outlet Positions, Centrifugal Fan CL

Open the catalog to page 7
ZCP - 8

number air handling functions which are built into in sections The sections are supplied on solid longitudinal base angles and assembled into complete units at the installation site. The code designations, descriptions, lengths and approximate weights of following pages. Example: A ZCP-180 unit for heating and cooling with an internal damper The weights include the individual functions with the corresponding housings and base angles. frames must also be added, and are, The overall length of a section is the included plus the length of the section's end frames, a total of 105 Heating and...

Open the catalog to page 8
ZCP - 9

* NB: When using these filter functions, there must be a function with inspection access immediately before it for changing the filter. ** NB: The filter is changed from the clean side. This is not an optimal solution Assembly into Sections (example on page 8): (No addition for frame section in 3 and 5 as the functions are independent sections.) Total length of unit, mm Total weight of unit, kg

Open the catalog to page 9
ZCP - 10

Heating coil, 1-5 rows of pipes Function weight excl. heating coil Heating coil, 6-15 rows of pipes Function weight excl. heating coil Cooling coil, 2-10 rows of pipes Function weight excl. cooling coil Cooling coil, Heating coil, Heating coil, Heating coil ght excl. cooling coil ght excl. heating coil ght excl. heating coil ght excl. heating coil Cooling coil, 2-5 rows of pipes Function weight excl. cooling coil Cooling coil, 6-9 rows of pipes Function weight excl. cooling coil Cooling coil, 10-13 rows of pipes Function weight excl. cooling coil Intermediate part between 2 other Humidifier...

Open the catalog to page 10
ZCP - 11

horizontal outlet vertical outlet Novax axial flow fan with adjusted blades. 1) Excl. weight of motor. Standard Equipment All fans are mounted on anti- vibration mountings (centrifugal fans - spring anti-vibration mountings; axial flow fans - rubber provided with an internal flexible All fan sections are also provided with inspection doors. Sensor and drain outlet on heating - Inlet vane control for centrifugal - Inspection windows. - Internal light. - Safety switch. - Non-slip bottom plating. - Water trap for drain. - Baffle plates for fan outlet - Air flow rate measuring nozzle, only for...

Open the catalog to page 11
ZCP - 12

The integrated dampers are louvre type with opposed blades and Shut-off Damper, - for closure when the system is not Mixing Damper, code SB - for mixing 2 air flows at the inlet. - for closure when the system is not operating and mixing outdoor air The damper blades are made of extruded aluminium and supported in an aluminium frame in plastic The dampers' stainless drive shafts can be connected directly to damper motors (for example, BELIMO) or linked to each other with rodding. The necessary control force is When closed, the dampers meet Special Installation All dampers are available for...

Open the catalog to page 12
ZCP - 13

The filter units for the Climaster units are supplied mounted in special frames and are available in different types, depending on the specific cleanness and separation For cleanness requirements that specify a filter of class F8, we recommend mounting a basic filter The filters meet the requirements for individual filters are stated in front Further filter data can be obtained from one of Novenco's sales Filter type Basic filters with degree Fine filters with degree uration filter units aluminium filter Disposable filter Disposable filter Disposable filter Number of filter units per air...

Open the catalog to page 13
ZCP - 14

Heating Coils for Water The heating coils consist of copper pipes with aluminium fins housed in a sheet steel frame. The heating coils are used as preheating and reheating coils. The heating coils are available with different numbers of pipes and circuits, depending on the actual heating requirements. The heating coils are available as A: built-in coils, mounted in rails in the unit, and B: intermediate coils, where the heating coil's frame is insulated and mounted together with the rest of the unit as a separate To achieve the greatest possible face area, the heating coils' header is...

Open the catalog to page 14

All Novenco catalogs and brochures

  1. NovPac-R

    2 Pages

  2. ZPR

    2 Pages

  3. Super Speed

    2 Pages

  4. workboats

    4 Pages

  5. navy system

    4 Pages

  6. FLEXAIR

    8 Pages

  7. ZerAx axial

    20 Pages

  8. ZCR

    32 Pages

  9. MICROVENT

    8 Pages

  10. CND and CNF

    24 Pages

  11. MICRO VENT

    8 Pages

  12. NOVPAC R

    2 Pages

  13. CNA-CNB

    20 Pages

Archived catalogs

  1. ACN

    28 Pages

  2. CAL

    40 Pages

  3. VMA-VMB

    24 Pages

  4. SJD

    12 Pages