VARICAP SYSTEM QUICK START
5Pages

VariCap System VARICAP SYSTEM QUICK START Quick Start VariCAP System Nottrot B.V. Everdenberg 79 4902 TT Oosterhout the Netherlands Tel: +31 (0)62 5154580 www.nottrot.com Company Confidential

VariCap System CHANGE HISTORY Version 0.1 1.0 Author Bas Verheijen Bas Verheijen Description Initial version First Release VariCap System, Version: 1.0, Proposal ©2021, Nottrot B.V. 6 December 2021 Company Confidential

QUICK START GUIDE 1. Open the Nottrot N-COM application 2. Click on Open Port (1) 3. Select the COM-port of the USB connected to the system (2) 4. Click on Lookup (3) 5. The N-Control and Data Converter are now connected * N-Control is always Net ID 1 The following steps will help create a pattern. If a configuration file is already available, proceed from step 20. If only a pattern file is already available, proceed from step 13. 6. Click on the pattern number to select it (1) 7. Enter a Pattern Name (2) 8. Choose a color for the Button text (3) 9. Choose a color for the Indicator LED (4)...

VariCap System The following steps will help create a configuration. If a configuration file is already available, proceed from step 20. 13. Go to the VariCAP tab 14. The Modbus addresses are set at Mod F2 and Mod F16. By default they’re matched, F16 can be changed if required (1) 15. (optional) Give (2) 16. Enter the Board Number. This number corresponds to the Booster number to which the VariCap sensor is connected (3) 17. Determine the channel number use the following formula (4): Channel Number = (B – 1) x 4 + S * B = Booster Position (1-8) corresponds to the port that connects the...

VariCap System 20. Write configuration to the Data Converter (1) 21. Save all presets (2) This stores the presets in the EEPROM of the Data Converter. That way the system remembers it’s presets after a reboot. 22. Write the presets into the Data Converter (3) A reboot is required to load the saved presets from the EEPROM. ‘Write all presets’ prevents the need for a reboot. (optional) Write the presets for a selected address Warning: “Read Config” doesn’t read the presets. All presets are reset to zero when a read is performed. If multiple Data Converters are connected to the PLC, repeat...