Self-Contained Air Conditioning Specifications and Dimensions MODEL Cool only With heat Cool only With heat Specifications may change without notice. Self contained systems feature condensing unit and evaporator mounted in common stainless steel pan with drains. Condensing unit features: • Heavy duty reciprocating compressor. Evaporator features: • 316L grade stainless steel shroud, and insulated pan. • Single-pass fluted coaxial cupronickel counter-flow condenser allows low sea water velocity while providing maximum efficiency and even condensing. • Fully rated evaporating coil set. • High and low charging ports easily accessible. • Engineered to eliminate the need for vibration isolation mounts. • Wiring covered with fire resistant sheathing. • Designed to withstand harsh marine environments. • 316L grade stainless steel chassis, fasteners, hardware and deep condensate with twin drains. • Stainless steel fasteners. • Rubber vibration compressor isolation mounting feet. NOTE: Raw water pump flow rates must be approved by Technicold engineering. Raw water pump rate must not exceed 2.5 gallons per minute per 12,000 BTU’s of cooling capacity. Contact factory for more information. • Small overall size. • Marine quality, corrosion-resistant gloss white finish. • Rotatable insulated blower. • Charged with environmentally responsible refrigerant. Technicold by Northern Lights • 1419 W. Newport Center Drive • Deerfield Beach, FL 33442 Tel: 954-421-1717 • 1-800-843-6140 • Fax: 954-421-1712 Information and dimensions subject to change without notice. Technicold and Northern Lights are registered trademarks of Northern Lights, Inc. © 2012 All rights reserved. Litho USA. S139 2/13