1. Catalogs
  2. Northern Lights
  3. NL944D3: 28 kW Northern Lights Industrial Generator
video corpo

NL944D3: 28 kW Northern Lights Industrial Generator

NL944D3: 28 kW Northern Lights Industrial Generator

NL944D3: 28 kW Northern Lights Industrial Generator

Product catalog summary
Overview: The NL944D3 is a 28kW generator set designed for critical applications such as work sites, cabins, lodges, or standby emergency power. It is built for rugged use and provides reliable power on demand.
Specifications: The generator is powered by a four-cylinder, 203 cubic inch diesel engine that is direct injected and naturally aspirated. It meets US EPA Tier III emission standards and features a clean-burn design to reduce fuel consumption and emissions.
Key Features:
  • Automatic voltage regulator with 300% short circuit protection and +/- 1% RMS voltage regulation.
  • High airflow from a large radiator and steel shroud for protection.
  • Service points aligned on a common side for easy maintenance.
  • Vibration isolation mounts for smooth operation.
  • Customizable options including control panels, enclosures, and trailers.
Engine Block: The engine is a Mitsubishi four-cycle, 4-cylinder, liquid-cooled, naturally aspirated diesel engine with overhead valves and four valves per cylinder. It features a noise barrier in the flywheel housing and a forged carbon steel crankshaft.
Cooling and Fuel Systems: The cooling system includes a liquid-cooled radiator with a pusher fan. The fuel system features direct injection with glow plugs, a Bosch-type injection pump, and a large spin-on fuel filter.
Intake and Exhaust: The generator meets US EPA Tier III emission requirements and includes a large air cleaner and unit mount exhaust muffler.
Lubrication System: It includes a full-flow, spin-on oil filter with a bypass and a lube oil drain for quick oil changes.
DC Electrical System: The system uses reliable relays and includes a 12-volt starter and battery charging alternator. It features a remote mount S-1B panel with various monitoring capabilities.
AC Generator: The generator is direct-coupled, 4-pole, with Class H insulation and a brushless design. It has a conservative heat rise rating and an automatic voltage regulator for voltage regulation.
Special Equipment: The generator is mounted on a steel base frame with vibration mounts and features a long-life Imron® enamel finish. It comes with operator and parts manuals and is test run with load.
AC Output: The generator provides 28 kW at 60 Hz, 1800 RPM, with options for single-phase output and voltage regulation of ±1%.
Installation Data: The generator includes specifications for exhaust outlet, fuel inlet and return, and approximate dry weight. It also notes deratings for altitude and temperature.
See more

Catalog excerpts

NL944D3: 28 kW Northern Lights Industrial Generator-1

NORTHERN LIGHTS Service Side - High volume air filter with replaceable element protects • Series 1 B control panel standard. Optional series radiator. Steel radiator shroud fuel filters. Non-Service Side • Tough, white Imron® paint. Distributor-type fuel injection pump, with rack control solenoid • Vibration isolation battery charging • Steel base If you require a 28kW generator set, chances are you are powering a critical job. Whether for a work site, cabin, lodge, or standby emergency power, you need power on demand. You need a Northern Lights. The NL944D3 is built for just these type of rugged applications. Built around a four- cylinder, 203 cubic inch base, the NL944D3 provides the power to run worry free and start electric motors with ease. Direct injected and naturally aspirated, the NL944D3 meets US EPA Tier III emission standard with a clean-burn design that cuts fuel use. At full load, the NL944D3 uses only XX gallons of diesel per hour. Smoke and noise signatures are also significantly lowered. The NL944D3 is equipped with a ruggedly reliable generator end. It's automatic voltage regulator is powered by dedicated AC winding fortrue 300% short circuit protection and quick +/-1% RMS no load to full load capability. Other features for long life and utility abound: high air flow comes from a large radiator with an easy access fill. A steel shroud protects radiator and operator. Most service points are thoughtfully aligned on a common side, making standard maintenance a breeze and permitting flexibility in installation. The generator set is constructed right onto the base frame with fuel lines routed to the base for easy installation. Vibration installation mounts provide for smooth and quiet operation. Like all Northern Lights models, the NL944D3 is easily customizable. From control panels to enclosures, trailers and a wide range of pre-engineered options, your Northern Lights dealer can help turn your generator set into a one of a kind power solution best suited to your needs. NORTHERN LIGHTS

 Open the catalog to page 1
NL944D3: 28 kW Northern Lights Industrial Generator-2

Single Phase with 1.0 PF Voltage regulation Vertical inline 4 cylinder diesel Installation Data & Weight Exhaust outlet Fuel inlet and return 1. Based on 1.0 unity power factor. Deratings: 3% per 1000 ft. over 500 feet above sea level. 1.5% for every 10° over77°F 2. Actual fuel consumption will vary depending on operating conditions. Engine Block • Mitsubichi four cycle, 4 cylinder, liquid cooled, naturally aspirated, overhead valve industrial duty diesel engine block. • Noise barrier cast into the flywheel housing for quiet operation. • Crankshaft is induction hardened, forged carbon steel;...

 Open the catalog to page 2

All Northern Lights catalogs and brochures

  1. DECS Brochure

    2  Pages

  2. L768

    1  Page

Archived catalogs

  1. DECS Brochure

    2  Pages

  2. M844DW3

    1  Page

  3. M944T3

    1  Page

  4. NL673L4

    1  Page

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.