Catalogs >
Northern Lights >
NL1064 Series Specification Sheet

NL1064 Series Specification Sheet
1Pages

Catalog excerpts

Emergency Standby Units 54 - 100 kW, 60 Hz @ 1800 RPM For five decades, Northern Lights has provided stand-by power generation solutions. From the extremes of the Alaskan bush, to the deserts of the Middle East, Northern Lights Land Based Generator sets have been built to last. The NL1064H Series feature a number of benefits that make them the most reliable, durable and simple to use machines in their power range. With three models, from 54-100 kW standby, the NL1064H’s are up to the most arduous of tasks. A high-torque, low RPM industrial diesel engine is combined with a conservatively rated generator end and your choice of control panels. The NL1064H series features a rotary or high-pressure common rail (HPCR) fuel system for optimal fuel delivery combined with cleaner emissions. Lugger L1064 Diesel Engine The Twin-counter rotating balance shafts dampen vibration for smoother operation. Liquid cooled and radiator equipped, the NL1064 Series is equipped with a fan guard and a steel radiator shroud to promote safety and reliability. NL1064H23 and NL1064H33 are designed to pick up 100% of the rated load with minimal voltage dip and a quick recovery time. A guiding principal behind Northern Lights engineering is simplicity of design. Unnecessary belts and hoses have been engineered away. Most service points are grouped on a common side. Spin on oil and fuel filters make routine maintenance a breeze. For base camps, homes or even off-grid power, Northern Lights NL1064H Series offers a customizable solution that is right for you. General Specifications and Dimensions Cylinders/Operating cycle Aspiration Displacement - cid (liter) Bore - inches (mm) Stroke - inches (mm) Flywheel housing size HP @ 1800 RPM Engine coolant capacity - US gal (ltr) Jacket water pump capacity - gpm (lpm) Maximum coolant temperature - F(C) Heat rejected to coolant, btu/min Exhaust gas flow, cfm(m3/m) Max exhaust gas temperature, F(C) Maximum allowable back pressure, in(mm) Fuel Injection Approximate fuel consumption, US gal(ltr) Minimum suction line size, NPT Minimum return line size, NPT Maximum transfer pump lift from pump in(mm) Maximum fuel flow to transfer pump GPH DC Starting voltage Alternator charging capacity Minimum Battery capacity Battery cable size Rated ambient air temperature Maximum rated temperature rise Oil pan capacity, US gal (ltr) Oil pressure at rated speed, psi (kPa) Oil pressure shutdown, psi (kPa) Length, inch (mm) Width, inch (mm) Height, inch (mm) Approx. set dry weight, lbs (kg) Cooling System Fuel System AC Electrical System Lubrication System Northern Lights, Inc. is ISO 9001 certified through Lloyds Register Quality Assurance Information and dimensions subject to change without notice. Northern Lights and Lugger are registered trademarks of Northern Lights, Inc. © 2013 All rights reserved. Litho USA. S126 8/13

Open the catalog to page 1