1. Catalogs
  2. Northern Lights
  3. M844LW3 Specification Sheet
video corpo

M844LW3 Specification Sheet

M844LW3 Specification Sheet

M844LW3 Specification Sheet

Product catalog summary
Specifications and Dimensions
The M844LW3 is a marine generator set available in two configurations: 20 kW at 60 Hz and 1800 rpm, and 16 kW at 50 Hz and 1500 rpm. It meets US EPA Tier III emission standards. The generator features a full flow, spin-on oil filter with bypass, a gear-driven seawater pump, and a replaceable heat exchanger element. The AC output is available in single-phase with optional three-phase, offering voltage regulation of ±1%.

Engine Data
The engine is a vertical inline 4-cylinder diesel with a displacement of 135 in³ (2.2 liters). It has a bore/stroke of 3.30/3.90 inches (84/100 mm) and produces 32 HP at 1800 RPM and 26 HP at 1500 RPM. Fuel consumption varies with load and RPM, with full load consumption at 1.70 gph (6.50 lph) at 1800 RPM and 1.36 gph (5.20 lph) at 1500 RPM.

Weight and Dimensions
The approximate dry weight is 973 lbs (441 kg), with dimensions of 46.0 inches in length, 22.8 inches in width, and 27.5 inches in height. The sound enclosure adds an additional 90 lbs (41 kg) and slightly increases the height.

Installation Data
Key installation dimensions include a 2-inch OD wet exhaust elbow, a 3/4-inch OD raw water inlet, and a 1/4-inch NPT fuel inlet and return.

Features and Benefits
The engine block is a four-cycle, 4-cylinder, liquid-cooled, naturally aspirated diesel with glow plugs for quick starting. The cooling system includes a standard heat exchanger with optional keel cooling. The fuel system is self-venting with an inline injection pump and mechanical governor. The intake and exhaust systems are designed to reduce noise and meet emission standards. The lubrication system features a closed crankcase vent and a large oil capacity for extended intervals between oil changes.

DC Electrical System
The DC system includes a 12-volt starter motor and battery charging alternator. A remote mount control panel is standard, with options for expansion. Safety shutdowns for low oil pressure, high coolant temperature, and high exhaust temperature are included.

AC Generator
The generator is direct-coupled with Class "H" insulation and features a conservative heat rise rating. It includes an automatic voltage regulator with ±1% voltage regulation, protected by a dedicated circuit breaker.

For more information, contact Northern Lights, Inc. at their Seattle office or visit their website.
See more

Catalog excerpts

M844LW3 Specification Sheet-1

20 kW (60 Hz, 1800 rpm) 16 kW (50 Hz, 1500 rpm) • One-piece heat exchanger, expansion tank and liquid cooled exhaust manifold. Cast iron to resist corrosion and electrolysis • Replaceable heat exchanger element • DC system uses reliable relays instead of an unrepairable printed circuit board • Gear driven seawater pump • Full flow, spin-on oil filter with bypass SPECIFICATIONS AND DIMENSIONS Engine Data Three Phase with 0.8 PF Voltage regulation Vertical inline 4 cylinder diesel 135 in3 (2.2 ltr) Displacement Bore/Stroke 1800 RPM @ full load 1800 RPM @ half load Sound enclosure weight 2. Actual fuel consumption will vary depending on operating conditions. Installation Data Enclosure length Enclosure width Enclosure height Fuel inlet and return Consult factory for classification society. US EPA Tier III Information and dimensions are subject to change witho

 Open the catalog to page 1
M844LW3 Specification Sheet-2

NORTHERN LIGHTS M844LW3 20 kW (60 Hz, 1800 rpm) 16 kW (50 Hz, 1500 rpm)FEATURES AND BENEFITS Engine Block www.northern-lights.com Northern Lights, Lugger and Technicold are registered trademarks of Northern Lights, Inc. © 2017 All rights reserved. Litho USA. B106 6/17

 Open the catalog to page 2

All Northern Lights catalogs and brochures

  1. DECS Brochure

    2  Pages

  2. L768

    1  Page

Archived catalogs

  1. DECS Brochure

    2  Pages

  2. M844DW3

    1  Page

  3. M944T3

    1  Page

  4. NL673L4

    1  Page

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.