Catalogs >
Northern Lights >
M30CW - 30 kW Northern Lights commercial series generator

M30CW - 30 kW Northern Lights commercial series generator
2Pages

Catalog excerpts

M30CW - 30 kW Northern Lights commercial series generator - 1

M30CW3 Service Side • Easy-ll cast aluminum expansion tank. • Bosch-type in-line injection pump with hand primer. • Spin-on oil & fuel lters. • Junction box has terminal strip, AC automatic voltage regulator, DC circuit breakers. Commercial Series 30 kW 60 Hz / 1800 RPM For 5 Decades, The Commercial Solution • Molded belt guard for safety. Commercial operators have a specic and challenging set of expectations for their power systems. Generators should be able to run at full load for extended periods. If they can’t; that equates to time lost and livelihoods threatened. No one understands this better than Northern Lights. Our product line began in the unforgiving Alaskan shing grounds. We have made improvements over the years, but have never forgotten the commitment to making the most reliable, durable and simple to use machines on the market. Case in point: the M30CW. Cranking out 30 kW at 60 Hz, the M30CW is a true low-maintenance workhorse. Single side service, minimal hoses and belts, and an industry-best warranty all add up to an excellent “plug and play” power solution for the commercial operator whose bottom line depends on reliable performance. The M30CW is engineered to withstand the rigors of commercial seagoing. Built for long life at full load, the M30CW is driven by a powerful Lugger engine and features Northern Lights’ exclusive W-Series generator end. The auxiliary stator winding provides real 300% short circuit protection and cleaner AC output than comparable generator models. Easily customizable, the M30CW even has the ability to deliver full engine power to a front PTO, enabling the user to run winches, thrusters or deck gear at the touch of a button. No detail has been overlooked in engineering a superior marine product. The 3.3 liter displacement provides plentiful power without the need for a turbocharger. The M30CW’s freshwater cooled exhaust manifold is sturdy cast iron with two pass cooling for even temperature control with no dry runners. For tugs, shing boats or passenger vessles, the M30CW is a true turn-key workhorse. You can learn more about the M30CW marine generator set by contacting your local dealer or visiting our website. • Dry type, replaceable air cleaner. Non- Service Side • Pre-wired for plug harness • Center bonded vibration mounts for smooth operation. • Standard dry exhaust elbow with insulated blanket • Welded steel base frame. • Fresh water cooled cast iron exhaust manifold with two pass cooling circuit for even temperature control. • 12 volt DC alternator with solid state regulator. • Tough, gray enamel.

Open the catalog to page 1

M30CW - 30 kW Northern Lights commercial series generator - 2

Specications and Dimensions AC Output1 30 kW Amperage Phase/power factor Voltage regulation M30CW3, 30 kW M30CW3 Dimensional Drawing 60 Hz, 1800 RPM 120-208 V/104 A Std: 3/0.8 (Opt:1/1.0) ±1% 2 2 8 3 Lugger L944D Engine Type Vertical inline 4 cylinder diesel Displacement 203 cubic in (3.33 ltr) Bore/Stroke 3.7 / 4.7 in (94 / 120 mm) HP @ RPM 49.0 @ 1800 Approx. fuel use 1800 RPM @ full load2 2.8 gph (9.8 lph) 1800 RPM @ half load2 1.5 gph (5.3 lph) 30.9 (785) Installation Data & Weight Wet exhaust elbow Dry exhaust outlet KC coolant inlet / outlet HE3 raw water inlet Fuel inlet hose / Fuel...

Open the catalog to page 2