Technical Specifications

This document provides detailed dimensional data and specifications for the NS1100 chair model, including measurements related to width, backrest positions, seat height, and sliding adjustments.

Dimensions and Adjustments

• Inner Width: 450 mm to 680 mm
• Outer Width: 280 mm plus 55 mm sliding adjustment
• Backrest Sliding Range: +55 mm forward sliding and -55 mm backward sliding
• Backrest Positions: Fully upright and fully reclined positions with minimum and maximum heights:
• Fully upright: 604 mm (min) to 958 mm (max)
• Fully reclined: 792 mm (min) to 972 mm (max)
• Seat Height: Minimum 510 mm to maximum 690 mm

Additional Measurements

• Other dimensions include values such as 291 mm, 348 mm, 292 mm, 206 mm, 264 mm, and 192 mm, likely related to sectional views or component sizes.

Notes and Recommendations

• All sitting heights are measured without load; actual dimensions may vary due to contraction of gas-struts, springs, upholstery, or third-party equipment.
• Dimensions are subject to change without notice unless under contractual configuration control.
• For critical dimensions or certified drawings, consultation with Norsap is advised.

Document Metadata

• Date: December 19, 2019
• Weight: 5050 (units not specified)
• Revision: 00.00
• Article Number: NS1100
• Section Reference: Section A-A, Scale 1:10

Source and Contact

For further information or interface details, visit www.norsap.no.