NORIS Brochure
15Pages

{{requestButtons}}

Catalog excerpts

NORIS Brochure - 1

Sensor Technology, Signal Processing, Visualisation

Open the catalog to page 1
NORIS Brochure - 2

Aim for success -with NORIS Content Aim for success - with NORIS 03 We supply everything from one source 04 Speed sensors (non-contacting) 08 Speed encoders (mech. connected) 14 Rotary position sensors 16 SIGNAL PROCESSING in detail Measuring transducers and limit value switches Multifunctional devices VISUALISATION in detail Analogue indicators For us reliability is key Our products are designed to reliably operate for years and years under the most extreme environmental conditions in safety applications. We constantly ask ourselves the question: „What is REALLY required in order to offer...

Open the catalog to page 2
NORIS Brochure - 3

from one source Speed sensors, combi-sensors, multi-channel sensors Temperature sensors Speed sensors Gearbox Customer-specific sensor combinations Pressure transducers Temperature sensors Rotary position sensors Signal processing: Multifunctional devices, measuring transducers, limit value switches Temperature sensors Pressure transducers Signal processing: Multifunctional devices, measuring transducers, limit value switches Switchgear cabinet Temperature sensors Speed sensors Signal processing: Multifunctional devices, measuring transducers, limit value switches Vessel engine Speed...

Open the catalog to page 3
NORIS Brochure - 4

Sensors in detail rature of bearings in drive units, recording pressures in hydraulic systems or registering Application-specific combination sensors the position of a ship‘s rudder, irrespective of how varied these applications may be they It is often necessary to register several have three things in common: measured variables at one point in a ma- Whether monitoring the speed of a ship‘s engine or railway gearbox, monitoring tempe- chine (especially in the area of condition In view of their harsh environments, they place exceptional mechanical and electrical demands on sensor systems...

Open the catalog to page 4
NORIS Brochure - 5

Speed sensors Main features Our speed sensors exhibit the following properties: Mechanics J Robust design with threaded rod or flange connection T Different housing materials (e.g. brass, stainless steel or aluminium) J Different connectors, threads and rod lengths JTest prod completely protected by metal enclosed end face, resistant to splash oil and lubricants even at high temperatures JProtection class of housing - IP66/IP67 (IP68 on request) JConnection lines protected by unique protective tube design - see information on sensor combinations (page 12) Today, non-contacting speed sensors...

Open the catalog to page 5
NORIS Brochure - 6

Temperature sensors Temperature sensors Nothing is more varied in the world of sensors than the structural shape. Although there are only a few measuring methods, the scope of applications and therefore the variety of structural applications are great. Our temperature sensors are specifically designed for transport technology and shipbuilding. We therefore construct our sensors according to the structural shapes required in these sectors. In transport technology our sensors are used to monitor bearing temperatures in the underfloor area as well as for engine and gearbox monitoring. On the...

Open the catalog to page 6
NORIS Brochure - 7

Sensor combinations Sensor combinations Corrugated tubing for standard applications As common practice in the sector, we use corrugated tubing for standard transport technology applications to provide adequate mechanical protection in many applications. Further advantages include the low weight and high degree of flexibility for installation. Special protective tubing under extreme conditions Our years of experience and our close cooperating with our customers have proven that corrugated tubing cannot adequately protect cabling from stone and ice impact especially on high speed trains, with...

Open the catalog to page 7
NORIS Brochure - 8

Speed encoders Pressure transducers Speed encoders Pressure transducers tachogenerator was often used in older systems. Our NADI and NAD2 speed encoders have been especially developed as a substitute for this component assembly and offers the following advantages: often pose problems in terms of reliability, accuracy, signal compatibility as well as signal stability and consequently also need to be replaced. For speed acquisition, a combination of a flexible shaft and Functional principle Piezo-resistive sensor elements are used for measuring ranges up to 10 bar while thin-film sensors are...

Open the catalog to page 8
NORIS Brochure - 9

Rotary position sensors Rotary position sensors Tachogenerators Our rotary position sensors are used wherever angular positions need to be registered reliably and converted into electrical signals by control systems for status monitoring purposes. The sensors are used, for example, in systems for displaying actual values and limit thresholds. As angle of rotation sensors are mostly installed directly on the bearing-mounted shafts of the objects to be measured and are therefore often difficult to access in such system, we attach particular importance to ensuring our sensors are durable,...

Open the catalog to page 9
NORIS Brochure - 10

Wireless sensor concept Smart sensor concept for wireless data logging on moveable parts Functional principle A passive, superior transponder is the basis of this smart concept. By means of an induc- surement of shaft torsion or the recording tive principle it operates without its own energy source. By this measurement principle, of rotor temperature in an electric motor. a coil is mounted on a moveable part (e. g. on a flywheel or piston rod) and is used as transducer for the measurement data. Your benefits at a glance By means of this movement, the transducer passes constantly the sensor...

Open the catalog to page 10
NORIS Brochure - 11

SIGNAL PROCESSING Measuring transducers and limit value switches Measuring transducers and limit value switches Standard devices Measuring transducers Limit value switches Multifunctional devices Automation systems (see product brochure on automation components) In the field of signal processing, our product portfolio ranges from simple devices such as measuring transducers, limit value switches, isolation amplifiers through multifunctional devices to highly complex automation systems (refer to our product brochures on automation components). Signal processing devices for special...

Open the catalog to page 11

All NORIS Group GmbH catalogs and brochures

  1. Datasheet FA13

    14 Pages

  2. Datasheet FA54

    11 Pages

Archived catalogs